Installation Guide

2
English
Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 176°F*
Flow rate - lavatory 1.5 GPM
Flow rate - bidet 2.2 GPM
Hole size in mounting surface 1⅜"
Max. depth of mounting surface 1⅜"
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
10111xx1
10211xx1
10121xx1
10129xx1
10123xx1
10⅛"
10"
1¾"
1¼"
13¾"
max1⅜"
4⅜"
3½"
⅜"
16¼"
16⅛"
22¾"
max 1⅜"
1¾"
4⅜"
9⅞"
⅜"
1¼"
8⅞"
8¾"
1¾"
2⅜"
1¼"
max 1⅜"
4⅜"
13¾"
⅜"
±
2
0
°
13⅛"
13"
10¼"
6½"
max. 1⅜"
1¾"
1¼"
4⅜"
27¾"
⅜