User's Manual

Axon Fleet 2 Wireless Microphone Installation and User Manual
Axon Enterprise, Inc. Page 8 of 23
To engage the Axon RapidLock mount, insert the key of the wireless microphone into the lock of the
mount and turn the microphone 90 degrees counterclockwise (when you are looking straight at the
mount). To release the wireless microphone from the mount, turn the wireless microphone 90 degrees
clockwise.
There are various mounts that use this system and they can be used with a wide variety of uniforms, and
hold the wireless microphone to your shirt, patrol vest, jacket, or belt.
The two mounts discussed here are the Clip Mount and the Magnetic Mount.
Mounting Information and Reco mmendations
The following list provides additional information and recommendations for mounting the wireless
microphone.
• The Thick Outerwear Magnetic Mount, SKU 74021, should not be used with the wireless
microphone. The significant amount of metal present in this mount diminishes wireless
microphone range.
• Axon recommends mounting the wireless microphone as high as possible on the chest for best
microphone performance.
• If an officer’s typical workflow is to approach stopped vehicles on the driver side of the vehicle,
Axon recommends mounting the wireless microphone on the right side of the body. Conversely,
if the typical workflow is approach to the passenger side, it is recommended to mount the
wireless microphone on the left side of the body.
• After a mounting location is selected, officers should test access to other officer-worn equipment
to ensure the wireless microphone does not interfere with access or use of the equipment.
Clip Mount
The clip mount provides a quick and easy way to mount the wireless microphone on your patrol vest,
jacket, or belt.
1. Insert the key on the back of the wireless microphone into the lock.