User's Manual

Axon Fleet 2 Wireless Microphone Installation and User Manual
Axon Enterprise, Inc. Page 6 of 23
Getting to know the Axon Fleet 2 Wireless Microphone
The following images show the different components on the Axon Fleet 2 wireless microphone, Model
AX1018.
Axon Fleet 2 wireless microphone front
On/Off switch – Turns the wireless microphone’s power on or off.
Microphone – For audio recording.
Speaker – Provides audio notifications.
Function button – Used for device pairing and to mute the device.
EVENT button – Used to start recording (Double-press to start).
Battery status button – When pressed, lights up the Battery LED, which momentarily indicates the
remaining battery capacity only.
Battery LED – When lit, momentarily indicates the remaining battery capacity (with default settings, it
does not indicate the operating mode).
When you turn the microphone on, the Operation LED turns solid red until the system is ready to use.
Then the Operation LED blinks green (BUFFERING mode).
The microphone can be configured so the Battery LED operates in sync with the Operation LED. In
BUFFERING mode both the Operation and Battery LEDs will blink green, and in EVENT mode both will
blink red.
If the battery status button is pressed, the battery LED displays the battery status for approximately 10
seconds and then resumes displaying the EVENT mode.
Microphone
Speaker
Battery status button
Battery LED
EVENT button
Function button
On/Off switch