User's Manual

Axon Fleet 2 Wireless Microphone Installation and User Manual
Axon Enterprise, Inc. Page 14 of 23
Notification Reference Tables
This section list all the audio, vibration, and LED indications associated with the Axon Fleet 2 wireless
microphone.
Audio Prompts
The Axon Fleet 2 wireless microphone emits beeping sounds called “audio prompts” to notify you of the
system status. The audio prompts are accompanied by a vibration that matches the beeps.
Operating Mode
Audio Notification
Haptic Notification
(Vibration)
Powering on or off
One beep
Once
Recording an event
Two beeps (every 2 minutes)
Twice (every 2 minutes)
The device is ending an event and returning to
BUFFERING mode
One long beep
Once, long duration
Low battery notifications:
• When in BUFFERING mode and battery has
power for 20 minutes or less
• When in EVENT (recording) mode and battery
nearly discharged (the microphone will shut
down within a few minutes)
Four quick beeps (every 20
seconds)
Four times, quickly (every
20 seconds)
Front camera memory is full, or the front camera
is not powered on (the camera will not record)
Three beeps
Three times
RF link is broken (out of range)
One beep (every 10 seconds)
Once (every 10 seconds)
Front camera internal clock is not set
Five quick beeps (every 20
seconds)
Five times, quickly (every
20 seconds)