User's Manual

Axon Fleet 2 Wireless Microphone Installation and User Manual
Axon Enterprise, Inc. Page 12 of 23
Operating Modes
The Axon Fleet 2 wireless microphone has two operating modes:
• BUFFERING (turning on the wireless microphone and starting pre-event buffering)
• EVENT (event recording)
These operating modes reflect the front camera operating modes (when the front camera is in
BUFFERING mode, the wireless microphone will indicate BUFFERING and will indicate EVENT when front
camera is in EVENT mode).
Note: The wireless microphone requires 12-15 seconds to fully power down when the power
switch is moved to the Off position. This is important if the user is attempting to re-boot.
BUFFERING Mode (turning on the wireless microphone)
• Move the Power Switch on the wireless microphone to the ON position.
The wireless microphone conducts start-up checks and syncs mode indications with the front camera.
When the front camera begins BUFFERING, the Operation LED on the wireless microphone will blink
green.
EVENT Mode
• When you need to record, quickly double-press the EVENT button on the wireless microphone.
The moment you double-press the EVENT button, both video and audio will be recorded. This will
continue throughout the duration of the recording until you terminate the recording.
Recording can also be started using Axon View XL, momentarily pressing the EVENT button on Axon
Fleet 2 front camera, or when the Axon Signal Vehicle unit sends a signal.
The wireless microphone provides you with indications that it is recording in EVENT mode:
• At the start of an event and every 2 minutes during an event, the wireless microphone beeps
twice.
• The Operation LED on top of the camera blinks red.
Recordings can only be stopped using Axon View XL or the Axon Fleet 2 Front camera EVENT button.
Muting Audio Recording
If your system administrator has configured your Axon Fleet 2 system to do so, you can use the function
button to disable audio recording during an event. This feature may be useful in sensitive situations.
• Press and hold the Function button for 3 seconds to mute the audio capture.