User manual

222
13:18:57.8 0.0 Start MainProtocol
13:18:58.3 0.5 Enter Loop0
13:18:58.3 0.5 06220153.P0, First Loop sweep
13:19:03.3 5.5 06220154.P0
13:19:08.3 10.5 06220155.P0
13:19:13.3 15.5 06220156.P0
13:19:18.3 20.5 06220157.P0
13:19:23.3 25.5 06220158.P0
13:19:28.3 30.5 06220159.P0
13:19:33.3 35.5 06220160.P0
13:19:38.3 40.5 06220161.P0
13:19:43.3 45.5 06220162.P0
13:19:48.3 50.5 06220163.P1, First Evoked FastRepeat sweep
13:19:49.3 51.5 06220164.P1
13:19:50.3 52.5 06220165.P1
13:19:51.3 53.5 06220166.P1
13:19:52.3 54.5 06220167.P1
13:19:53.3 55.5 06220168.P0, Next sweep after last Evoked FastRepeat sweep
13:19:58.3 1:00.5 06220169.P0
13:20:03.3 1:05.5 06220170.P0
13:20:08.3 1:10.5 06220171.P0
13:20:13.3 1:15.5 06220172.P0
13:20:18.3 1:20.5 06220173.P0
13:20:23.3 1:25.5 06220174.P0
13:20:28.3 1:30.5 06220175.P0
13:20:33.3 1:35.5 06220176.P0
13:20:38.3 1:40.5 06220177.P0
13:20:43.3 1:45.5 Leave Loop0
13:20:43.3 1:45.5 Stop MainProtocol
Fig. 11.5.1b. Log output for the protocol in Fig. 11.5.1a. Both the P0 and P1 checkboxes were checked.
After the 10
th
P0sweep, an ersatz Fast Repeat LTD stimulation of five P1sweeps every 1 sec was
manually evoked by clicking the ‘P1’ Repeat button.
If the P0 and P1 checkboxes were unchecked, a much shorter output shown in Fig. 11.5.1c is obtained.
Note however that the first sweep of the Evoked FastRepeat stimulation, sweep 06220163.P1 at 50.5 sec
is shown, and the first sweep after the Evoked FastRepeat stimulation 06220168.P0 at 55.5 sec is also
shown, so the relevant information of what sweeps are before, during and after the Evoked FastRepeat
stimulation and the sweep times is available.
13:18:57.8 0.0 Start MainProtocol
13:18:58.3 0.5 Enter Loop0
13:18:58.3 0.5 06220153.P0, First Loop sweep
13:19:48.3 50.5 06220163.P1, First Evoked FastRepeat sweep
13:19:53.3 55.5 06220168.P0, Next sweep after last Evoked FastRepeat sweep
13:20:43.3 1:45.5 Leave Loop0
13:20:43.3 1:45.5 Stop MainProtocol
Fig. 11.5.1c. Log output for the protocol in Fig. 11.5.1a., but both the P0 and P1 checkboxes were
unchecked. After the 10
th
P0sweep, an ersatz Fast Repeat LTD stimulation of five P1sweeps every 1 sec
was manually evoked by clicking the ‘P1’ Repeat button.
Similarly, if FastRepeat Sweep LTD stimulation is caused by clicking a Run event with a Loop in it, the
first LTD sweep will again be marked, and the first sweep after the LTD stimulation will again be marked.