User manual

218
Fig 11.3.1b show the Log output with Loop, AvgLoop, P0 and AP0 checked.
16:02:55.0 0.0 Start MainProtocol
16:02:55.5 0.5 Enter Loop0
16:02:55.5 0.5 Enter AvgLoop1
16:02:55.5 0.5 06210264.P0, First Loop/AvgLoop sweep
16:03:00.5 5.5 06210265.P0
16:03:05.5 10.5 06210266.P0
16:03:10.5 15.5 06210267.P0
16:03:10.5 15.5 06210267.AP0
16:03:15.5 20.5 Leave AvgLoop1
16:03:15.5 20.5 Enter AvgLoop1
16:03:15.5 20.5 06210268.P0, First AvgLoop sweep
16:03:20.5 25.5 06210269.P0
16:03:25.5 30.5 06210270.P0
16:03:30.5 35.5 06210271.P0
16:03:30.5 35.5 06210271.AP0
16:03:35.5 40.5 Leave AvgLoop1
16:03:35.5 40.5 Enter AvgLoop1
16:03:35.5 40.5 06210272.P0, First AvgLoop sweep
16:03:40.5 45.5 06210273.P0
16:03:45.5 50.5 06210274.P0
16:03:50.5 55.5 06210275.P0
16:03:50.5 55.5 06210275.AP0
16:03:55.5 1:00.5 Leave AvgLoop1
16:03:55.5 1:00.5 Leave Loop0
16:03:55.5 1:00.5 Stop MainProtocol
Fig. 11.3.1b. Log output with Loop, AvgLoop, P0 and AP0 checked.
When the AvgLoop is unchecked, but Loop, P0 and AP0 remain checked (Fig. 11.3.1c), the experiment
becomes somewhat clearer. The AvgLoop is clearly superfluous.
16:05:32.3 0.0 Start MainProtocol
16:05:32.8 0.5 Enter Loop0
16:05:32.8 0.5 06210277.P0, First Loop/AvgLoop sweep
16:05:37.8 5.5 06210278.P0
16:05:42.8 10.5 06210279.P0
16:05:47.8 15.5 06210280.P0
16:05:47.8 15.5 06210280.AP0
16:05:52.8 20.5 06210281.P0, First AvgLoop sweep
16:05:57.8 25.5 06210282.P0
16:06:02.8 30.5 06210283.P0
16:06:07.8 35.5 06210284.P0
16:06:07.8 35.5 06210284.AP0
16:06:12.8 40.5 06210285.P0, First AvgLoop sweep
16:06:17.8 45.5 06210286.P0
16:06:22.8 50.5 06210287.P0
16:06:27.8 55.5 06210288.P0
16:06:27.8 55.5 06210288.AP0
16:06:32.8 1:00.5 Leave AvgLoop1
16:06:32.8 1:00.5 Leave Loop0
16:06:32.8 1:00.5 Stop MainProtocol
Fig. 11.3.1c. AvgLoop is unchecked, but Loop, P0 and AP0 remain checked.
Sometimes P0 and P1 sweep stimulation is crucial to understanding (such as during Fast Repeat Sweep
LTD stimulation), but often this is not the case and they can be unchecked. So, when the P0 as well as
the AvgLoop is unchecked, but the Loop and AP0 are still checked (Fig. 11.3.1d), the occurrence of AP0
files provides enough information of experimental flow.