Operator`s manual

2 • Introduction

Components

• Digidata 1322A with power cord

• SCSI cable, 10 ft. length

• CD-ROM with AxoScope 8 (Windows only)

• Manual (includes Warranty Registration Card)

• SCSI adapter card and device driver CD-ROM

• Rack Mount Kit

Minimum Computer Requirements

• IBM PC-compatible computer with a Pentium 133 MHz or faster, OR

Power Macintosh

• One open PCI slot

• 32 MB RAM

• 200 MB hard disk

• Parallel port (if using with the parallel port key required by pCLAMP)

• 800 x 600 display system (small fonts)

• Windows 95, 98, NT 4.0, or Windows 2000 operating system (PC), OR

System 7.5 (Mac)

Recommended Computer System

• IBM PC-compatible computer with a Pentium 200 MHz or faster, OR

Power Macintosh G4

• One open PCI slot

• 64 MB RAM (or higher)

• 1 GB hard disk (or more)

• Parallel port (if using with the parallel port key required by pCLAMP)

• 1024 x 768 display system (large or small fonts)

• Windows 95, 98, NT 4.0, or Windows 2000 operating system (PC), OR

System 9 (Mac)