User manual

Digital Lighting Release Notes Page 9 of 24
13636 Decklink SDI card output goes to wrong color space when set to HD format
w/ATI s-video capture
13649 EULA is missing DL3 from the header
13657 Column Headers are not aligning correctly in the All Configurations window in
the CMA
New Features in v1.5.4:
• Add Horizontal Cylinder Correction Global Effects at DMX Value 148 and 149 to
allow for horizontal convex and concave cylinder surface adjustments.
Mod1: Adjusts correction.
Mod2: Sets horizontal center position.
Mod3: Not used.
• Added Collage Generator 3 at DMX Value 150 and Collage Generator 3 Wrap at
DMX Value 151 to provide updated blend curves when dealing with large collage
arrays.
• Split Collage Generator Effect modifier 3 0-127 range for all Collage Generator
modes such that:
0 - 63 decreases blend region intensity
64 - 127 increases blend region intensity.
• Add variable collage blend width support under Global Viewpoint Mode DMX
Value 127 to allow for on-the-fly adjustment of blend regions from 0% hard edge
to a 50% blend region overlap. When Global Viewpoint mode is set to this value
the Viewpoint position modifiers affect the following:
Viewpoint X Pos: Adjusts Left/Right width of blend region.
Viewpoint Y Pos: Adjusts Top/Bottom width of blend region.
Viewpoint Z Pos: Not used.
Bugs Fixed in v1.5.4:
13205 Geometry Correction Effects Broken
13193 Object 0 not detected at startup.
11098 Head fans fall to 5V immediately upon fixture shutdown
New Features in v1.5.3:
• Added Support for new DL.3F fixture model.
Bugs Fixed in v1.5.3:
13021 Hauppauge S-video Cards non-functional in DL2