User manual

Digital Lighting Release Notes Page 3 of 24
New Features in v2.1.2:
- Texture Over-scan effect added. Effect 106
• Modifier 1: Controls X scaling of texture applied to 3d Object
• Modifier 2: Controls Y scaling of texture applied to 3d Object
• Modifier 3: Not sured
- Along with Axon XPe Image 3.6.0, added support for the ASUS P8Z77-V LK
motherboard and Intel i7-3770 processor to Axon\
- Added alternate acceleration curves for DL.3 fixture, aiding in smoother motion
when making extremely long crossfades. This new motion mode is accessible by
setting the DL.3 Motion Control channel to a value of 15 to 18.
Bugs Fixed in v2.1.2:
17651 SDI capture getting out of sync between servers
17652 DL.3 fixtures with P8H77-M motherboard BSoD after removing/reapplying
DMX
17653 Axon servers with P8P67 Pro motherboard crash with BSoD after firmware
upgrade
17659 DL.3 Tilt can overshoot target, slam into stops
New Features in v2.1.1:
- Along with DL.3 XPe Image 2.6.0, added support for the ASUS P8H77-M/CSM
motherboard and Intel i7-3770 processor
New Features in Axon XPe v3.6.0:
• Added support for ASUS P8Z77-V LK motherboard and Intel i7-3770 processor
Previous Releases:
Bugs Fixed in v2.1.1:
17618 Black band appearing on screen with Segmented Collage, Variable Edge Blend,
and Image Clipping
17631 CITP server frequently failing to shut down when DL application is shutting
down
17632 DL application fails to launch completely if CITP process does not launch
17633 DL Installer needs to check if CITP process is running at upgrade time, kill if
necessary
17635 Add Interlaced video to content scanning specs
17647 DL.2 LX55 Focus operation does not work with values under 177