User manual
Digital Lighting Release Notes Page 16 of 24
will now properly work seamlessly with multiple network adapters all enabled
and active.
Bugs Fixed in v1.3.2:
9278 Lamp restrikes itself after being told to douse from menu
10250 Lamp hours not tracking correctly with newly implemented Eco Mode
10263 Windows XPe version does not update in config info after partial restore
10361 The CMA crashes when no network interface exists.
8885 Allow DL.2/Axon to get multicast traffic on all network interfaces.
10383 CMA Upload Browse dialog should show both *.axo and *.dl2 file types together.
10419 The CMA's subsystem can incorrectly think it is a DL.2 on a standard PC.
10387 CMA gets in bad state with radio disabled
10129 Need to allow CMA Install on Vista O/S
10287 Differences in CircleSphere object.
10420 hes6CircleSphere.x erroneously installed, needs to be removed
10251 Projector Type not updating in menu or on screen stats
10205 Implement improved alignment grid
10207 Transparency in PNG files does not work.
10330 Optical pin-cushioning correction added.
10290 Tighten the tolerance on object snaps
10414 Filter graphs for some MPEG2 movies incorrect
10413 Filter graph dirty on graph build failure
10431 Memory leak associated with Click + Shift
10435 Graphics engine hangs up on corrupt jpgs.
New Features in v1.3.1:
• Major Improvements to CMA Networking and Sync performance. Routers can
now be utilized in the network to speed up fixture discovery with the CMA.
• Collage Generator Effect expanded up to any configuration of up to 8x8 array
sizes.
• Enhanced Collage Generator Effect added at DMX Value 141. This new
enhanced version is optimized for arrays greater than 2x2, eliminating heavy
aliasing of objects and dramatically increases the available image resolution.
• Lamp Eco mode added to automatically reduce the lamp power and increase lamp
life whenever the mechanical iris is closed.
• Image Scale and Rotate effects added at DMX value 52 to manipulate the image
texture within the object.
Mod1: Scales Image
Mod2: Rotation Angle
Mod3: Rotation Speed