Operation Manual

Axnes AS
Document number
Revision
Date
AX-PNG-UMAN-1220
Issue C
2018-Jun-05
Page 5-1
Confidential document and information
Section 5: Qualifications
The PNG system is qualified to the relevant sections of:
• RTCA DO-160G Environmental conditions and test procedures for airborne
equipment.
• RTCA DO-178C / EASA ED-12C Software Considerations in Airborne Systems and
Equipment Certification
• Specification EN 302 561 V1.2.1 (2009-12) Electromagnetic compatibility and Radio
spectrum Matters (ERM); Land Mobile Service; Radio equipment using constant or
non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50
kHz, 100 kHz or 150 kHz; Harmonized EN covering essential requirements of article
3.2 of the R&TTE Directive
• Specification EN 301 178-1 V1.3.1 (2007-02) Portable Very High Frequency (VHF)
radiotelephone equipment for the maritime service operating in the VHF bands (for
non-GMDSS applications only); Part 2 Harmonized EN covering essential
requirements of article 3.2 of the R&TTE Directive
• Specification IEC EN60529 Edition 2.1 2001-02 Degrees of Protection Provided by
Enclosures (IP code): IP68, 3m depth for 30min.
• FCC 47 CFR Part 15B 15.109 and 15.107 Radiated emissions and AC powerline
conducted emissions
• Head and body SAR UHF according KDB447498 D01 v06 General RF Exposure
Guidance
• Head and body SAR VHF according KDB447498 D01 v06 General RF Exposure
Guidance
• FCC 47 CFR Part 80 and Part 2, VHF transceiver: 80.205/2.1049, 80.209/2.1055,
80.211/2.1051, 80.213/2.1047, 80.215/2.1046, 80.217 (b)
• FCC 47 CFR Part 90 and Part 2, UHF transceiver: 90.205/2.1046, 90.209/2.1049,
90.213/2.1055, 90.207/2.1047, 90.210/2.1051, 90.210/2.1053, 90.221, 90.214
Detailed qualifications are published in the PNG specification, AX-PNG-SPC-0019.