Operation Manual

Axnes AS
Document number
Revision
Date
AX-PNG-UMAN-1220
Issue C
2018-Jun-05
Page 2-7
Confidential document and information
Direct mode indication: When the MP50 is in Direct mode (maritime VHF), a ‘D’ will be
blinking in the display in standby mode
Local mode indication: When the MP50 is in person-to-person/Local mode, ‘L’ will be
blinking in the display in standby mode.
AIS indication: When the AIS functionality is active, ‘A’ will be blinking in the display.
Walkie-talkie mode
The MP50 can be connected to a headset or it can be used as a handheld walkie-talkie when
conditions allow.
In walkie-talkie mode, the MP50 will be operating in half duplex push to talk mode. PTT1 and
PTT2 is active as defined in the active configuration.
Battery full
Battery low