Operation Manual

Axnes AS

Document number

Revision

Date

AX-PNG-UMAN-1270

Issue B

2018-Jun-21

Page 2-4

General UI

The MP30 is equipped with a small dot matrix display located at the top, angled to be

readable from front and top.

All buttons on the MP30 are located in a rectangle on the front:

• Primary PTT (PTT-1) at the top

• Volume up/ON at the upper right

• Volume down/OFF at the lower right

• Secondary PTT (PTT2) at the bottom

• Configuration up and down at the upper and lower left

• MENU and OK in the centre

The two configuration buttons are used for selecting the active configuration when in

intercom mode, or the active channel when in direct mode. There are also two buttons for

menu navigation (MENU and OK). These four buttons (MENU, OK, configuration up and

configuration down) are used to implement a four-way menu navigation.

The MP30 implements vocal audio feedback on some of the user operations. The vocal

feedback helps with the navigation and alerts the operator of unintended operation of buttons

and functions.

Two-character dot matrix display

GPS antenna

Headset connector

Secondary PTT (PTT-2)

Primary PTT (PTT-1)

Configuration up/down

Volume Up/On

Volume Down/Off

Microphone