Owner`s manual

www.axminster.co.uk
Axminster Devon EX13 5PH UK
FREEPHONE 0800 371822
Woodturner’s Chuck User Manual


Thread Code Thread Size Lathe Type 1 2 3 4 Tpi/Pitch T01 3/4" x 16tpi Carbatec, Coronet, Record 3/4" 3/16" 3/4" 11/16" 16 T02 1 1/2" x 6tpi NV28-40, Supalathe, Graduate 1 1/2" 3/8" 1 1/2" 1 1/8" 6 T03 1" x 12tpi Myford ML8, Turnstyler 1 1/8" 3/8" 1" 1" 12 T04M 1" x 8tpi APTC M Series Lathes, Delta 1" 1/4" 1" 1 1/8" 8 T06 1 1/2" x 8tpi Powermatic 1 1/2" 3/8" 1 1/2" 1" 8 T23 1 1/4" x 8tpi General 260 1 1/4" 1/8" 1 1/4" 1" 8 T37 30mm x 3.5mm Minimax 30mm 18mm 30mm 40mm 3.5mm T38 33mm x 3.5mm
Hegner, Kity, Konig, Jet 3520B,1642, 1442
34mm 16mm 33mm 30mm 3.5mm
T38W 33mm x 3.5mm Woodfast, 33mm 6mm 33mm 29mm 3.5mm T38PRO * 33mm x 3.5mm 4224 Professional, 3520A 33mm 4mm 33mm 37mm 3.5mm T38V Special Fitting Vicmarc VB36 Special Fitting VB36
Thread CodeThread Size Lathe Type 1234 Tpi/Pitch
T02RL 1 1/2" x 6tpi Harrison Graduate and
APTC Woodfast Lathes to suit 1 1/2" 3/8" 1 1/2" 1 1/8" 6 both sides of the headstock
Right Hand/Left Hand Threads
Right Hand Threads
Please measure register diameter (1) to ensure the correct fitting