User manual
OWNER’MANUAL OF SL700C/SLP600C
14
•
Do not use near any electrical wires.
■
The use of rear handle（
（（
（only SLP600C）
））
）
IMPORTANT
During the using, if the blade has stopped，please operate as follows：
● The branches is too thick, please choose branches below 8mm.
● If the blade cutting is worsening : the blade maybe worn，the gap
between the blades is too big decreasing the cutting ability.
WARIG
● The blades are very sharp ， so they are very
dangerous. If used the wrong way it will result
in an
accident，so you should always obey the manual .
○ Never put the blades near the body.
○ Clean the branches off the blades, and make sure
that you stop the machine.
○ While using the machine, should wear the correct
clothing, safety equipment and strong gloves.
○ While the machine is not used, make sure that the
blade is cover is installed.
DAGER