Instruction manual

The undersigned, Galen Chen authorised
by Shanghai SIEG Machinery Co., Ltd.
No.555 Caofeng Rd., South to No. 17 Bridge of Caoan Rd.,
Shanghai. P.R.China
declares that this product:
SX2
manufactured by Shanghai SIEG Machinery Co. is in
compliance with the following standards or
standardisation documents in accordance with Council
Directives
EN13128: 2001+A1: 2006 + A2: 2009/AC: 2010
EN61029-1: 2009+A11: 2010
Machinery Directive 2006/42/EC
WHATʼS IN THE BOX
Quantity Item Model Number
1 No. Mill with Chuck and M12 Draw Bar fitted SX2
Box containing:-
1 No. Set of Allen Keys
1 No. Chuck Key
1 No. ‘C’ Spanner
2 No. ‘T’ Slot Keepers
2 No. Steel Pins
1 No. Tommy Bar
1 No. Oiling Bottle
1 No. 36mm Spanner
1 No. 19mm Spanner
1 No. 10mm Spanner
DECLARATION OF CONFORMITY
32
1 No. Mill Support Casting
1 No. Tilt Housing Casting
1 No. 36mm Nut
3 No. M8x30 Caphead bolts
and washers
4 No. M8x35 Caphead bolts
and washers
1 No. Mill/Drill Table
1 No. M10 Drawbar
1 No. 3/8" Drawbar
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
A
B
C
D
E
F
G
H
I
J