Operating instructions

Maintenance
20
Fig 39-40-41
Base plate
Motor assembly
Rocker arm Lower blade holder
Dust extraction outlet
2) An occasional light coat of oil on the table to
prevent surface rust is recommended.
3) Occasionally wipe the machine over with a damp
cloth.
4) If the scroll saw is not going to be used for a period
of time, smear a light coat of oil over the work table
and place a dust sheet over the saw.
Rocker Arm Bearing Bushes
After a period of use it is recommended to lightly oil
the upper and lower rocker arm bearings, see fig 42.
Fig 42
Bearing bushes