Specifications

Operating Instructions

BEFORE ROUTING CONNECT THE

MACHINE TO A DUST EXTRACTION

SYSTEM. ALWAYS TURN ON THE

DUST EXTRACTOR BEFORE STARTING

THE ROUTER AND ALWAYS STOP THE

ROUTER BEFORE TURNING OFF THE

DUST EXTRACTOR.

MAKE SURE TO READ, AND FOLLOW

ALL OPERATING INSTRUCTIONS AND

SAFETY GUIDELINES THAT CAME

WITH YOUR ROUTER FAILURE TO DO

SO MAY LEAD TO SERIOUS INJURY

AND/OR DAMAGE TO THE ROUTER,

ROUTER TABLE, OR WORKPIECE.

There is a 62mm dust outlet on the rear of the fence

assembly allowing for the connection of a dust

extractor (not included).

Be sure to use an appropriate size hose and ﬁttings

and check that all connections are sealed tightly to

minimize airborne dust.

If you do not already own a dust extraction system,

consider contacting Axminster Tool Centre on

03332

406406

for information on our complete line of dust

extraction systems or visit our website at axminster.

co.uk.

• Install the required bit in your router according to

the instructions supplied with your router.

• Make sure that the router is rmly attached to the

table insert and that the plate is properly ﬁtted and

level in the table opening (see pages 16-17 ), ﬁtting

table insert.

• The router table should be installed on a at, sturdy,

and stable surface.

• When jointing, groove cutting, and/or prole cutting

always perform a test cut on a scrap piece of wood

before cutting your ﬁnal piece.

Connecting a Dust Extractor