Specifications

Assembly
18
Fig 39
secure both brackets with M6 Hex screws (e), see fig
40. DO NOT OVERTIGHTEN
Fig 40
Fig 41
P
h
O
e
j
Step 3 Loosen the two locking knobs beneath the
fixing brackets (P), slide the two scales into the top
of fixing brackets recess and lightly tighten the
knobs, see fig 41.
Step 5 Locate the fence assembly (K), ‘T’ bolts (d) and
at washers (i). Insert six ‘T’ bolts into the pre-drilled
holes in the fence (K), place a washer (i) on each ‘T’
bolt and screw on the locking knobs (b). (See figs
43-44)
Step 4 Locate the two lock Hex nuts (g) and slide
each one into the machined recess in the fixing
brackets (P), see fig 42.
Scale
Locking knob
Fig 42
Fig 43-44
g
b
i
K
Step 6 Locate the two adjustable wood faces (Q),
lineup the ‘T’ bolts (d) with the ‘T’ slots in the wood
face (Q) and slide on the wood face, lightly tighten.
(See fig 45). Repeat for the other side.
d
P