Specifications

Assembly
16
Step 3 Locate the ten countersink Phillips wood
screws and screw them into the threaded holes
beneath the MDF table insert recess. (See figs 30-31)
UJK Router Table MDF Top
Note: The MDF top is fixed to
the stand assembly by Phillips
head wood screws, see fig 29
Fig 29
Phillips head wood screws
Fig 30-31
Countersink Phillips
wood screw
Step 1 Locate the table insert, four grub screws
and the two countersink Hex screws. Place the UJK
table insert into the tables recess, adjust the ten
countersink Phillips screws beneath the table, see
fig 32 until the table insert is roughly level with the
table surface. Adjust the locking nuts to lock the
countersink screws in position. (See figs 33-34)
Fig 32
Stand and Table Assembled
NOTE: There are four options to choose from:
• 6mm Aluminium Table Insert (Code 502749)
• 10mm Phenolic Insert ( Code 502747)
• 10mm Aluminium Insert with Universal Base
(Code 502748)
• Axminster Router Elevator (Code 952574)
Optional Table Inserts
The following instructions are for the optional
UJK 6mm Aluminium table insert but it will apply
for the other options as well.