Specifications

Index of Contents
2
Introduction
Warning
The symbols below advise that you follow the
correct safety procedures when using this tool.
Fully read manual
and safety
instructions
before use
Eye protection
should be worn
Ear protection
should be worn
Dust mask
should be worn
The UJK Technology Compact Leg Stand with splayed legs is of
sturdy construction, very stable and of a size that offers portability
around the workshop or on site. Provision is made for storage of
the supplied mitre fence assembly. Measuring 370mm high, with
a footprint of 580 x 390mm, this leg stand is such a useful size and
could also be used for mounting many other small machines.
The Phenolic or MDF Router Table Tops are additional options
that you can choose from when making up your UJK router table.
Phenolic resin is a very stable material and may be a good choice
if your workshop suffers from damp or humid conditions. The MDF
Router Table Top is a very sturdy versatile unit capable of many
routing operations. An extruded aluminium track is provided
which includes a standard 19mm track for the use of a mitre fence
and a T-track slot is also provided for other jigs and accessories.
The fence is a superb quality single aluminium section supplied
with a transparent dust port for efficient extraction from above
the table. Provision is made for the fitting of guards and
accessories with a T-slot at both the top and front of the fence.
An adjustable transparent guard is included for your safety.
Adjustable scales are provided for attachment at either side of
the table and the fence is attached to these and locks into place
at the required position. A scale is also provided for the top of the
fence with the zero position at the centre. Adjustable in-feed and
out-feed fences attach to either side of the aluminium section and
the central aperture can be opened and closed according to the
diameter of the cutter in use. Fence measures 904 x 90mm high.
Index of Contents 02
Introduction 02
What’s Included 03-04-05-06
UJK Router Table Stand
UJK Router Table Tops
UJK Fence Assembly
Optional Accessories 7-8
Kit Specifications 08-09
General Instructions for 230V Machines 09
General Safety Instructions 10
Assembly 11-19
UJK Router Table Stand Assembly 11-12
Router Table Top Assembly 13-14
Optional Table Inserts 14-15
UJK Fence Assembly 16-17-18-19
Mitre Fence Assembly 19
Tool Storage Holders 19
Overview Description 20-21
Mounting the Router 22-23
Operating Instructions 24
Parts Drawing/List (Router Table & Stand Assembly (E Type) 25-26
Parts Drawing/List (Router Table Fence Assembly) 27-28
Notes 29-30-31