Specifications

Assembly
19
Fig 45
Fig 46
i
i
J
Fig 47
Mitre Fence Assembly
Tool Storage Holders
Step 1 Locate the mitre fence(10) and extension
(11), Note: the bag of fixings will be tucked inside
the extension assembly. Slide the two Hex bolts into
the extension ‘T’ slot. Insert the Hex bolt down into
the machined slots in the mitre fence and secure
the assembly with the two wing nuts, DO NOT
OVERTIGHTEN! (See fig 47)
10
11
Mitre fence
extension
Hex bolt/washer
Wing nut
Fig 48
Fig 49
Step 2 Slide the mitre fence assembly into the tables
‘T’ slot, (see fig 48).
To store your tools when not in use, place the mitre
fence assembly into the mitre fence bracket (1), hook
the insert plate spanner over one of the two Phillips
screw hangers and Insert the shaft of the winding
handle from UJK router elevator, (502701) through
the pre-drilled hole in the tool bracket (2). (see fig 49)
Mitre fence
Insert plate spanner
Winding handle