Specifications

04
Having unpacked your machine and its accessories,
please check the contents against the equipment list
”What’s in the box”, if there are any discrepancies,
please contact Axminster Tool Centre using the
procedures laid down in the catalogue. Please dispose
of the packaging responsibly; much of the material is
bio-degradable.
Please read the Instruction Manual prior to using your
new tool; there are daily and periodic maintenance
recommendations to help you keep your machine
on top line and prolong its life. Keep this Instruction
Manual readily accessible for any others who may also
be required to use the machine.
Please read through the section entitled Identification
and Description of Parts, so that you will be familiar
with the terminology we will use in the manual, and so
that you can identify the parts quickly and easily.
What’s Included
Code
Machine Table Size
Rise and Fall Platform Size:
Router Mounting Plate
Maximum Rise and Fall
Rise and Fall Linear Movement per turn
Floating Measurement Dial Graduation
Centre Hole Diameter (Without insert ring)
Centre Hole Diameter in Insert Ring
Centre Hole in Rise and Fall Platform
‘Lost’ Cutter Length (from router mounting plate to machine table)
Overall Size L x W x H
Weight
502701
306mm x 229mm x 6mm
275mm x 200mm
Circular Universal Type
100mm
2mm
0.125mm
92mm
38mm
75mm
14.5mm
L 306mm x W 229mm x H 165mm
6 kg
SpecificationsSpecifications
Accessories
Note: The Assembly requires a through table void of 280mm x 205mm. The recess for the Machine Table is
306mm + 229mm + 6mm + deep. The dimensions and the position are shown on the next page (See Fig A)
Axcaliber Router Collet Extension (1/2” Shank)
(Code: 211367)