Specifications

2
Chip Extraction
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
106
A high quality chip/coarse dust extractor, for connection to multiple machines or,
ideally, to a ducted system. With an airfl ow of 2,400 m3/hr it will easily handle 2-3 small
workshop machines or 1 large multiple outlet machine. Robustly built, quiet running
and effi cient in design this machine will suit the majority of requirements found in a
typical small carpenter/joinery workshop. Fitted with a high effi ciency steel fan and
the unique “Vortex” cone design which maintains a high collection performance by
preventing premature clogging of the fi lter. This works by separating the waste from
the airfl ow, diverting the waste into the collecting bags. You can also upgrade the
fi ltration performance by the addition of two Fine Filter Cartidge’s which will have a
very noticeable effect when the extractor is used on sanding machines. The fi lter’s
performance is maintained by the use of the internal paddle blade, operated by a
handle on the top of the fi lter housing. Powered by a 2.2 kW 415V 3ph motor, this is a
compact and very versatile extractor. Supplied with a pack of fi ve collection bags and
a 30 micron fi lter bag. Supplied without a hose. Please note this machine uses waste
sack size - 785 x 940mm (410241).
DC1900A Extractor 415V £699.95 £583.29 700389
785 x 940mm Waste Sack Orange (Pkt 10) £12.44 £10.37 410241
Inc.vat Ex.vat Code
Chip Extraction
Jet DC-950A Extractor
Fitted with an industrial quality motor and specially designed impellor and housing
for high extraction effi ciency and quiet, vibration free running. Quick install collection
bags means no straps are required. Four castors allow easy mobility. The 100mm inlet
allows connections to most workshop machines, this extractor will easily cope with a
12” saw or 10 x 6” planer/thicknesser. Rugged design, withstands everyday use. Perfect
for a small workshop, and offers a much better performance than lower cost machines.
Supplied with a pack of fi ve collection bags and a 30 micron fi lter bag. An optional Fine
Filter Cartridge (700232) will fi lter out fi ne saw and sanding machine dusts.
Supplied without a hose.
N.B. This machine uses waste sack size - 560 x 915mm (340068).
DC9050-A Dust Extractor 230V £286.94 £239.12 700231
560 x 915mm Waste Sack Red (Pkt 10) £10.44 £8.70 340068
Inc.vat Ex.vat Code
Model
Rating
Power
Air Flow
Noise Level
Particle Size
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
DC-1100A
Trade
1.1kW (Max Input 1.9kW)
230V 1ph
1,620 m³/hr @ 150mm
1,100 m³/hr @ 100mm
80dB(A)
30 micron
150mm, 2 x 100mm
200 litres
940 x 510 x 1,830mm
71kg
DC1900A
Trade
2.2kW, (Max Input 4.25kW),
415V, 3ph
2,900m³/hr
@ 200mm
80dB(A)
30 micron
3 x 100mm or 1 x 200mm
400 litres
1,500 x 760 x 2,400mm
95kg
Comparison Chart - Chip Extraction
DC-950A
Trade
750W (Max Input 1,250W)
230V 1ph
950m³/hr
70dB(A)
30 micron
100mm
58 litres
670 x 355 x 1,440mm
38kg
Jet DC1900A Extractor
02_Dust Extraction 094_113.indd 106 29/11/2013 11:00