Specifications
2
Section
Order online axminster.co.uk/extraction
105
Section
Order online axminster.co.uk/extraction
Chip Extraction
Comparison Chart - Cyclone Extraction
Model T-2000CK
Rating Trade
Power 0.75 kW (230V, 1ph)
Air Flow 1,100m³/hr
Noise Level 80 dB @ 3m
Filter Area 3.8m²
Filtration 1 micron
Particle Size 1 micron
Hose Diameter 150mm x 1, 100mm x 2
Overall L x W x H 1,300 x 1,100 x 1,560mm
Weight 71kg
This is a small, highly portable cyclone extractor, aimed at the smaller workshop with many different
types of machinery in use. Having a high effi ciency separation system means that the air passing
through the fi lter is 99% clean of waste, maintaining a high airfl ow for top performance. The fi lter has
a 1 micron fi ltration performance and is fi tted with a simple manual cleaning system. A manometer
gauge gives an easy visual performance reference. Large waste bin 105 litres and is easy to remove
and empty. Fitted with sturdy castors, this extractor is quite mobile so is easy to move from machine
to machine. However, with a 150mm inlet it also lends itself to be fi tted to a permanent ducting
system. Able to run from a standard 13A plug, it is an attractive proposition for a small trade
workshop or a keen amateur in a home workshop.
T-2000CK 1HP Cyclone Extractor £749.95 £624.96 505087
Inc.vat Ex.vat Code
Axminster Trade Series T-2000CK 1hp
Cyclone Extractor
T-2000CK-HR
Trade
1.5kW (230V, 1ph)
2,300m³/hr
84dB @ 3m
7.4m²
1 micron
1 micron
200mm x 1, 100mm x 2
1,250 x 1,000 x 1,800mm
83kg
This larger “Trade” rated extractor is also compact in size and is able to extract from larger, higher
waste volume producing machines. Sharing the same high effi ciency air fl ow system ensures high,
consistent performance. Over 99% of waste is separated from the air stream before the air is passed
through the 1 micron fi lter; a simple manual fi lter cleaning system keeps the fi lter clean. There is a
manometer fi tted to give a quick, visual indication of the fi lter performance. Waste container 155
litres is easily detached from the machine and has castors to allow easy mobility. The machine is fi tted
with wheels for mobility, but we would suggest the best way to get the benefi t of this machine is to
connect it to a permanent ducting system. The 200mm inlet would allow a multiple ported system to
be used. Quiet and unobtrusive in use, this would be a good choice in many workshops.
N.B. 2 Filter Cartridges required for FM300SA
T-2000CK 2hp Cyclone Extractor £1,099.96 £916.63 505088
Inc.vat Ex.vat Code
Axminster Trade Series T-2000CK 2hp
Cyclone Extractor
Chip Extraction
These optional HEPA cartridge fi lter’s for the T-2000CK 1 and
2hp Cyclone Extractor’s gives a 0.3 micron fi ltering performance.
These fi lter’s are best suited for use when these machine’s are
mainly being used for extracting from sanders or other fi ne dust
producing machines. Some extra attention paid to keeping the
fi lter clean will pay dividends for the performance of these fi lter’s.
HEPA Filter for T-2000CK Cyclone s
Specifi cations
HEPA Filter for T-2000CK 1hp Cyclone £179.95 £149.96 505089
HEPA Filter for T-2000CK 2hp Cyclone £259.96 £216.63 505090
Inc.vat Ex.vat Code
02_Dust Extraction 094_113.indd 105 29/11/2013 10:59