Specifications

114
2
Section
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
Extraction Accessories
Gulp up all your shavings and dust with this handy attachment.
Simply connect it to a length of 100mm fl exible hose linked into
your workshop extractor and clean up! With a convenient handle
and castor wheels you will whizz round your workshop in no time.
Supplied complete with a blastgate, you can leave this rigged
up permamently. Requires an extractor size of 1,000m³/hr as a
minimum to work effectively, so many small, portable extractors
are quite suitable.
Floor Gulper Attachment £37.94 £31.62 211551
Inc.vat Ex.vat Code
Floor Gulper
Attachment
Floor Gulper
Floor Gulper
A simple dust extraction hood
mounted on an adjustable
height stand. Very useful
for situations where direct
connection to a machine
is not possible, such as
woodturning. Having a robust
ABS hood fastened to a 100mm
diameter metal tube, this is
easily connected to fl exible
extraction hose leading from
your extraction system. The
steel stand gives a useful height
range from 750-1,200mm and
has 3 feet, so no wobbles on
your uneven workshop fl oor! The
hood has an inlet of 320 x 35mm
creating a good airfl ow, an
extractor of at least 750m3/hour
is recommended. Will not accept
Big mouth dust hood (200114)
Variable Height Extraction Stand £26.94 £22.45 950030
Inc.vat Ex.vat Code
Light Duty
Variable Height
Extraction Hood
The Table Saw Extraction Guard provides a two-part solution
to the problem of handling large sheets on a saw bench. Firstly,
it supports the extraction hose clear of the table to allow wide
sheets to pass through uninterrupted and secondly, its 100mm
diameter hose can be connected directly to the extractor to
give a greater airfl ow and hence more effective extraction. The
guard is intended for use with saws equipped with a right hand
extension table and will extend up to 2 metres, giving clearance
for even the widest of sheet material. The guard is supported
on a tubular steel pillar which stands on the fl oor alongside the
extension table and secured to it with a bracket and bracing rods.
The method of fi tting the bracket to the saw table depends on
the material and construction of the table and there may be some
simple fi tting work necessary.
If you are still unsure of suitability please contact our
Specialist Sales Dept.
Extraction Hood £159.95 £133.29 056002
Inc.vat Ex.vat Code
Saw Table Dust
Extraction Guard
A heat shrink sleeve available in three sizes that can simply be
held in place and shrunk to size with a heat gun. The perfect
solution for odd sized dust extraction outlets. 510162 has a
maximum diameter of 50mm shrinking down to 25mm, 510170
has a maximum diameter of 80mm and shrinks down to 40mm
and the 510109 shrinks down from 100mm to 50mm. All sizes
are at least 100mm long. Full manufacturers instructions for use
available to download.
Heat Shrink Sleeve 50-25mm £3.95 £3.29 510162
Heat Shrink Sleeve 80-40mm £4.96 £4.13 510170
Heat Shrink Sleeve 100-50mm £6.95 £5.79 510109
Inc.vat Ex.vat Code
Heat Shrink
Sleeve
This is a 2.9 metre power tool hose with a 51mm threaded
cuff, to fi t the 210616 adaptor cuff. Will also fi t all Numatic
vacuum cleaners and extractors. Used with 610325 stepped
rubber reducer, this can be adapted to fi t virtually all hand held
power tools with an extraction port or most small bench top
woodworking machines.
2.9m 32mm hose £19.94 £16.62 210551
Inc.vat Ex.vat Code
Numatic 2.9m x 32mm Hose
This is a very useful adaptor for connecting extraction hoses to
a variety of power tools and other small machines. Can be used
as it is or trimmed to length to suit a range of outlet diameters.
Dimensions are: length 160mm, small end internal diameter
22mm, external diameter 30mm, large end internal diameter
38mm, external diameter 45mm.
Stepped Hose Reducer £12.95 £10.79 610325
Inc.vat Ex.vat Code
Numatic Stepped Hose Reducer
This is a very useful device enabling
the secure positioning of a 100mm
extraction hose or dust port in many
different ways. The saddle and hose
clip have a very strong magnetic
mount which can be used alone to
attach to a ferrous metal surface
whilst the supplied clamp can be
used to position the bracket either
vertically or horizontally. Especially
useful for woodturning or bench
work.
Dust Port Bracket £14.94 £12.45 210299
Inc.vat Ex.vat Code
Universal Dust
Port Bracket
Bendi-Hoze is an articulated tube 75 mm
diameter by 610mm long. It is designed
to attach to an extractor and can be
adjusted so that the inlet is in the best
position to extract from a lathe, bench
sander, soldering station, power tool etc.
The kit includes a 75mm hose adaptor
and three extraction nozzles. The fi rst
nozzle is a 115 x 90mm funnel, the second
a 115mm round funnel and the third a
narrow vacuum nozzle. An additional
600mm extension hose is available either as an extension or to
use a number of the hose ends at the same time.
Bendi-Hoze Kit £32.45 £27.04 056001
Extension 600mm £22.94 £19.12 056003
Inc.vat Ex.vat Code
Axminster Bendi-Hoze
Bendi-Hoze is an articulated tube 75 mm
diameter by 610mm long. It is designed
sander, soldering station, power tool etc.
nozzle is a 115 x 90mm funnel, the second
600mm extension hose is available either as an extension or to
Axminster Bendi-Hoze
For extracting waste from a lathe or other dust source where
direct connection to the machine is not possible or convenient.
Adjustable in height from 710mm to 1220mm with tilting facility
to enable the collection slot to be positioned at the best possible
angle. The hood is made from cast alloy and the collection slot
measures 300 x 50mm. It is easily connected to 100mm fl exible
hose leading to an extractor of around 1,000m3/hr. The 200114
Big Mouth Hood can be fi tted in place of the nozzle to give a
410 x 405mm collection area. Extraction from a woodturning
lathe can present problems, using the 200797 100mm Stayput
extraction hose fi tted into this nozzle and set up behind the lathe
makes for very effi cient extraction.
Adjustable Nozzle £79.96 £66.63 410073
Dust Hood £10.74 £8.95 200114
Inc.vat Ex.vat Code
Heavy Duty Variable Height
Extraction Hood
02_Dust Extraction 094_113.indd 114 29/11/2013 11:06