Specifications

ManualsBrandsAxminster ManualsKitchen AppliancesFT-1000

113

Section

Order online axminster.co.uk/extraction

Extraction Accessories

An extra 100mm x 100mm joining splice for use with the

100mm wall mounted ducting kit to extend it if required.

Joining Splice £2.75 £2.29 210698

Inc.vat Ex.vat Code

100mm x 100mm

Joining Splice

for 100mm Dust

Extraction kit

These handy hose clips

allows the quick changing

of a 100mm dust extraction hose

from one machine to another. Acting

as a large spring and operated by

one hand it could not be easier. Ideal for the hobby woodworker

in a small workshop, now there is no excuse for not using your

extractor. Supplied in pairs.

Quick Release 100mm Hose Clip (Pair) £5.45 £4.54 210323

Inc.vat Ex.vat Code

Quick Release

100mm Hose

Fixing Clip

WARNING

Dust and debris moving inside the plastic extraction hose may

cause a build up of static electricity. This can cause a potential

hazard especially with ﬁ ne dust. Dust extraction systems are a

great deal safer if properly grounded. This kit contains 12metres

of copper wire and all the necessary adaptors to ground a system.

Dust Extraction Grounding Kit £17.95 £14.96 510412

Inc.vat Ex.vat Code

Dust Extraction System

Grounding Kit

Used for securing hose ends and also for many other applications.

Second to none on exhaust repairs! 510405 is a ﬂ exible driver

with a hexagon socket at the end - the quick and safe way to

tighten up your clips, available separately.

51 to 70mm Clip (Pkt 3) £3.05 £2.54 510401

70 to 90mm Clip £1.25 £1.04 410477

95 to 115mm Clip £1.55 £1.29 410486

110 to 140mm Clip £1.74 £1.45 410487

135 to 165mm Clip £1.94 £1.62 410488

185 to 210mm Clip £2.15 £1.79 951617

Flexible Clip Driver £13.44 £11.20 510405

Inc.vat Ex.vat Code

Hose Fixing

Clips

A simple steel ﬁ xing clip with plastic butterﬂ y handle for speed

and ease of use and ideal for most 100mm hose applications.

Especially useful when blockages occur; they can be rectiﬁ ed

immediately without the need for screwdriver or clipdriver.

90 to 110mm Clip (each) £1.55 £1.29 500480

90 to 110mm Clip (Pkt 5) £6.95 £5.79 500481

50 - 70mm Clip £1.44 £1.20 211998

70 - 90mm Clip £1.44 £1.20 211999

110 - 130mm Clip £1.55 £1.29 950501

Inc.vat Ex.vat Code

Quick Fit

Hose Fixing

Clips

An important accessory in the installation of any dust extraction

system. Blastgates are ﬁ tted into the ducts between the machines

and the dust extractor and can be opened or closed to control

the ﬂ ow to the various machines. 100mm diameter.

Plastic Blastgate for 100mm Hose £3.05 £2.54 340921

Inc.vat Ex.vat Code

Plastic Blastgates

allows the quick changing

of a 100mm dust extraction hose

from one machine to another. Acting

as a large spring and operated by

one hand it could not be easier. Ideal for the hobby woodworker

Aluminium blastgates, stronger than plastic and with a locking

screw.

Blastgate for 100mm Hose £7.94 £6.62 340920

Blastgate for 125mm Hose £9.95 £8.29 200071

Blastgate for 150mm Hose £11.45 £9.54 200070

Inc.vat Ex.vat Code

Aluminium Blastgates

This adaptor has a whole range of uses including making the

hose connections on home-made dust extractor hoods and cowls

from thin section plywood. 100mm adaptor made from ABS

plastic and measures 205mm square.

ABS Flanged Spigot for 100mm Hose £2.24 £1.87 500181

Inc.vat Ex.vat Code

Flanged Spigots

A large rectangular funnel, 410 x 325mm and 270mm deep

ending in a circular spigot to ﬁ t 100mm diameter hose. The Big

Mouth Dust Hood will ﬁ t directly onto the Axminster Heavy Duty

Variable Height Dust Extraction Hood (410073), providing a larger

catchment area, or it can be used alone behind a radial arm saw

or other machine with no speciﬁ c extraction port.

Dust Hood £10.74 £8.95 200114

Inc.vat Ex.vat Code

Big Mouth Dust Hood

You can either use your extractor in the manner of a vacuum

cleaner, or use a soft brush to sweep the debris into the mouth of

this ABS ﬁ tment. Fits onto a 100mm hose.

ABS Floor Sweep for 100mm Hose £6.44 £5.37 510411

Inc.vat Ex.vat Code

Floor Sweep

This Y Junction hose ducting

accessory is strong with a smooth

internal bore. The outside diameters

of the ﬁ tting allow for a snug ﬁ t into

the appropriate size of ﬂ exible hose

and secured using ﬁ xing clips.

ABS Y Junction for 75mm Hose £3.95 £3.29 990052

ABS Y Junction for 100mm Hose £5.64 £4.70 990053

Inc.vat Ex.vat Code

Y Junctions

Inc.vat

Ex.vat Code

This T Junction hose ducting accessory

is manufactured from high quality ABS

plastic and is strong with a smooth

internal bore. The outside diameter of

the ﬁ tting allow for a snug ﬁ t into the

appropriate size of ﬂ exible hose and

secured using ﬁ xing clips.

ABS T Junction for 100mm Hose £5.75 £4.79 900337

Inc.vat Ex.vat Code

T Junctions

Inc.vat

Ex.vat Code

This elbow gives a gently rounded

curved bend which produces less

resistance to the air as well as

minimising the risk of blockage.

90° ABS Elbow for 100mm Hose £4.85 £4.04 410258

Inc.vat Ex.vat Code

Elbows

An extra 100mm 45 degree elbow for use with the 100mm wall

mounted ducting kit to extend it if required.

45° Elbow £3.54 £2.95 210699

Inc.vat Ex.vat Code

100mm x 45 Degree

Elbow for 100mm

Dust Extraction kit

An extra 100mm 45 degree elbow for use with the 100mm wall

An extra 100mm wall clip for use with the 100mm wall mounted

ducting kit to extend it if required.

Wall Clip £00.95 £00.79 210700

Inc.vat Ex.vat Code

100mm Wall Clip

for 100mm Dust

Extraction Kit

An extra 100mm wall clip for use with the 100mm wall mounted

An extra length of 100mm x 910mm clear tube for use with the

100mm wall mounted kit to extend it if required.

100mm x 910mm clear pipe £14.94 £12.45 210697

Inc.vat Ex.vat Code

100mm x 910mm Clear Pipe for

100mm Dust Extraction kit

02_Dust Extraction 094_113.indd 113 29/11/2013 11:05