Specifications

Chip Extraction
114
2
axminster.co.uk/signup for our exclusive email offers
Model
Rating
Power
Air Flow
Noise Level
Particle Size
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
DC-950A
Trade
750W (Max Input 1,250W)
230V 1ph
950m³/hr
70dB(A)
30 micron
100mm
58 litres
670 x 355 x 1,440mm
38kg
Comparison Chart - Jet Chip Extractors
Fitted with an industrial quality motor and specially designed impellor and housing for high
extraction efficiency and quiet, vibration free running. Quick install collection bags means no
straps are required. Four castors allow easy mobility. The 100mm inlet allows connections to most
workshop machines, this extractor will easily cope with a 12” saw or 10 x 6” planer/thicknesser.
Rugged design, withstands everyday use. Perfect for a small workshop, and offers a much better
performance than lower cost machines. Supplied with a pack of five collection bags and a 30
micron filter bag. An optional Fine Filter Cartridge (700232) will filter out fine saw and sanding
machine dusts. Supplied without a hose.
N.B. This machine uses waste sack size - 560 x 915mm (340068).
Jet DC-950A Extractor
Accessories
Accessories
560 x 915mm Waste Sack Red (Pkt 10) £11.46 £9.55 340068
Inc.vat Ex.vat Code
£299.95
Code: 700231
Ex.vat: £249.96
Fine Filter Cartridge for the Jet DC-950A
Extractor. Upgrades the machine to
handle fine saw and sanding machine
dusts. Simply clamps on with four hand
knobs. Easily cleaned with a crank
handle. Particle size 1 micron. Internal
mounting size is 360mm diameter.
Fine Filter
Cartridge for
Jet DC-950A
Fine Filter for DC-950A £279.96 £233.30 700232
Inc.vat Ex.vat Code
Jet DC1900A Extractor
DC1900A
Trade
2.2kW, (Max Input 4.25kW),
415V, 3ph
2,900m³/hr @ 200mm
80dB(A)
30 micron
3 x 100mm or 1 x 200mm
400 litres
1,500 x 760 x 2,400mm
95kg
A high quality chip/coarse dust extractor, for connection to multiple machines or, ideally, to a
ducted system. With an airflow of 2,400 m3/hr it will easily handle 2-3 small workshop machines or
1 large multiple outlet machine. Robustly built, quiet running and efficient in design this machine
will suit the majority of requirements found in a typical small carpenter/joinery workshop. Fitted
with a high efficiency steel fan and the unique “Vortex” cone design which maintains a high
collection performance by preventing premature clogging of the filter. This works by separating
the waste from the airflow, diverting the waste into the collecting bags. You can also upgrade
the filtration performance by the addition of two Fine Filter Cartidge’s which will have a very
noticeable effect when the extractor is used on sanding machines. The filter’s performance is
maintained by the use of the internal paddle blade, operated by a handle on the top of the filter
housing. Powered by a 2.2 kW 415V 3ph motor, this is a compact and very versatile extractor.
Supplied with a pack of five collection bags and a 30 micron filter bag. Supplied without a hose.
N.B. This machine uses waste sack size - 785 x 940mm (410241).
785 x 940mm Waste Sack Orange (Pkt 10) £13.96 £11.63 410241
Inc.vat Ex.vat Code
DC-1100A
Trade
1.1kW (Max Input 1.9kW)
230V 1ph
1,620 m³/hr @ 150mm
1,100 m³/hr @ 100mm
80dB(A)
30 micron
150mm, 2 x 100mm
200 litres
940 x 510 x 1,830mm
71kg
£714.96
Code: 700389
Ex.vat: £595.80
Dust Extraction.indd 114 27/11/2014 16:03