Specifications

ManualsBrandsAxminster ManualsKitchen AppliancesFT-1000

Air Filters

108

Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95

Once the dust extractor is turned off, the cutting or sanding ﬁnished, off comes the mask and in most instances we think we have been very safety conscious. In fact, until a ray of sunlight passes through

the workshop window we are unaware that a very high level of dust is still present in the air, probably just as much as when the machine or dust producer was in full swing. In order to further improve your

workshop conditions, we offer a range of workshop air ﬁlters which may be left running quietly in the background, ﬁltering out the very ﬁne airborne dust particles. Using a two stage ﬁlter, the polyester

pre-ﬁlter removes the larger particles whilst the multi-pocket bag ﬁlter ﬁlters out the very much ﬁner particles. Suitable for ceiling mounting, wall mounting or just ‘stand alone’, these air ﬁlters will greatly

improve the workshop environment. In order to specify the correct size ﬁlter or number of ﬁlters for a workshop, calculate the workshop volume and look to circulate the air some six times per hour.

N.B. Air ﬁlters are to be used in conjunction with dust extraction and do not dispel the need for efﬁcient machine extraction.

Charcoal ﬁlter

Electrostatic pre-ﬁlter

Dust Extraction & Wood Waste

Position anywhere in the workshop

This is a medium to large workshop ﬁlter unit which has the

advantage that it can be positioned anywhere in the workshop,

either on a bench, a shelf or suspended from the ceiling. The

unit is easy to operate and has three speeds simply activated by

the push of a button or by using the convenient remote control.

It should be mounted away from ventilation and heating vents

and is only suitable for non-metallic dust particles. The unit can

be positioned either vertically or horizontally to best utilise the

space available. It is ﬁtted with a pleated cloth main ﬁlter and an

electrostatically charged pre-ﬁlter. An optional charcoal ﬁlter is

available which can (a) neutralise odours and harmful organic

fumes and (b) refresh the air by removing smoke, dust, bacteria,

pollen and other harmful microscopic particles. Supplied with

main ﬁlter, electrostatically charged pre-ﬁlter and remote

control. For best results leave the AFS-500 running for an hour

to clean the air after your machines have been switched off, or

use the built in 2,4 or 8 hour timer options to run the ﬁlter after

you leave the workshop.

Jet

AFS-500 Air Filtration System

AFS-500/1000B Electrostatic Filter £15.96 £13.30 708731

AFS500 Main Filter £31.96 £26.63 310484

AFS-500/1000B Charcoal Filter £28.96 £24.13 708734

Inc.vat Ex.vat Code

Replacement Filters

£239.95

Code: 310483

Ex.vat: £199.96

Dust Extraction.indd 108 27/11/2014 16:02

Summary of content (20 pages)

PAGE 1
Dust Extraction & Wood Waste Air Filters Once the dust extractor is turned off, the cutting or sanding finished, off comes the mask and in most instances we think we have been very safety conscious. In fact, until a ray of sunlight passes through the workshop window we are unaware that a very high level of dust is still present in the air, probably just as much as when the machine or dust producer was in full swing.
PAGE 2
Air Filters Air Filter Mounting Kit Ceiling mounting kit for the JET air filtration units consisting of four lengths of flexible stainless steel wire with screw eyes and bolt-up crimps. Mounting Kit Inc.vat £34.96 Ex.vat £29.13 Code 400398 A A Inner main pleated filter B Electrostatic filter 2 Perform CCAF Spare Filters B Original quality replacement filters for the Perform CCAF Air Filter. Both inner and outer filters available. Replacement Outer Filter Replacement Inner Filter Inc.vat £19.
PAGE 3
Chip Extraction These extractors are powered by centrifugal fans which draw a large volume of air through the inlet hose and discharge it through the fabric filter bag situated on the top of the machine. The waste falls into the lower bag which will either be a fabric or plastic waste sacks, where applicable. Although these machines generate a large volume of airflow the pressure rise is low which makes them unsuitable for operating with small diameter inlet hoses.
PAGE 4
Chip Extractors Optional pleated filter cartridge available to improve filtration Bag filter efficiency 30 micron £274.96 Quiet and powerful 1.5kW 1ph 230V motor Ex.vat: £229.
PAGE 5
Chip Extraction 1 micron cartridge filter with high airflow, internal paddle for cleaning 1 micron cartridge filter with high airflow, internal paddle for cleaning Common sized 100mm inlet, suits many machines Common sized 100mm inlet, suits many machines Rugged build for the trade workshop environment Rugged build for the trade workshop environment 2 Generous airflow from the efficient alloy impeller Wheeled base and handle for easy mobility Generous airflow from the efficient alloy impeller Whee
PAGE 6
Chip Extraction High efficiency cyclone, 99% separation of dust and air before passing through the filter Manual filter cleaning system, easy to maintain air flow Nice compact design, perfect for a ducted system 1 micron filter cartridge, optional 0.
PAGE 7
Chip Extraction £299.95 Ex.vat: £249.96 Code: 700231 £714.96 2 Ex.vat: £595.80 Code: 700389 Jet DC1900A Extractor Jet DC-950A Extractor Fitted with an industrial quality motor and specially designed impellor and housing for high extraction efficiency and quiet, vibration free running. Quick install collection bags means no straps are required. Four castors allow easy mobility.
PAGE 8
Chip Extraction Without the Vortex Cone – filter gets clogged reducing performance and requiring frequent maintenance. £364.96 Ex.vat: £304.13 Code: 210045 With the Vortex Cone – filter stays cleaner preserving performance and requiring little maintenance. Particle separation technology that prevents up to 98% of particles from entering the upper bag or canister. 2 Performance Only fine particles move to the filter chamber making manual cleaning easier and decreasing health concerns.
PAGE 9
Industrial Extractors Automatic filter cleaning for consistent performance £1,859.95 Filter cartridge captures 99% of dust from 0.2-2 microns in size Ex.vat: £1,549.96 Code: 210642 £2,219.95 Steel impellor in close housing gives exceptional perfomance Ex.vat: £1,849.96 Code: 210643 Automatic filter cleaning for consistent performance Steel impellor in close housing gives exceptional perfromance 2 Filter cartridge captures 99% of dust from 0.
PAGE 10
Vacuum Extractors Head secured with quick release strap to allow easy emptying 1,100W 230V 1ph brush motor 35L drum capacity, 1 micron cartidge filter fitted 100mm x 1.5m flexible hose supplied Noise level 85dB(A) Optional hose and adaptor for power tool use available (718910) Axminster Hobby Series RDC100H Vacuum Extractor Air flow 180m³/hr, Suction Pa 25,000 £119.95 Ex.vat: £99.
PAGE 11
Vacuum Extractors Fitted with a red “Filtrex” primary filter and a secondary “Permatex” filter giving filtration down to 0.5 microns @ 99.
PAGE 12
Downdraft Tables £169.96 Clear Lightweight PVC Extraction Hose Ex.vat: £141.63 Code: 501266 Rubber grommets for workpiece protection 100mm outlet port to connect to your dust extractor Internal baffles to provide equal air flow all over the table surface Axminster Hobby Series DT-700U Downdraft Table The DT-700U is very useful when hand sanding. Of all steel construction, with a generous 903 x 473mm table size and protective rubber grommets, quite large items can be placed onto this downdraft table.
PAGE 13
Extraction Accessories Axminster Flexible Extraction Hose Kit • Lengths of high quality wire reinforced 100mm hose • Rubber end cuffs to suit extraction outlets 100-110mm • Ideal for mobile workshop chip and dust extractors Inc.vat Axminster 4m x 100mm Extraction Hose Kit £74.95 Axminster 2m x 100mm Extraction Hose Kit £44.95 Ex.vat £62.46 £37.
PAGE 14
Extraction Accessories Quick Release 100mm Hose Fixing Clip 100mm x 910mm Clear Pipe for 100mm Dust Extraction kit An extra length of 100mm x 910mm clear tube for use with the 100mm wall mounted kit to extend it if required. 100mm x 910mm clear pipe Inc.vat £16.96 Ex.vat £14.13 Code 210697 100mm x 100mm Joining Splice for 100mm Dust Extraction kit These handy hose clips allow the quick changing of a 100mm dust extraction hose from one machine to another.
PAGE 15
Extraction Accessories Universal Dust Port Bracket This is a very useful device enabling the secure positioning of a 100mm extraction hose or dust port in many different ways. The saddle and hose clip have a very strong magnetic mount which can be used alone to attach to a ferrous metal surface whilst the supplied clamp can be used to position the bracket either vertically or horizontally. Especially useful for woodturning or bench work. Dust Port Bracket Inc.vat £15.96 Numatic 2.9m x 32mm Hose Ex.
PAGE 16
Extraction Accessories 510074 510066 Rubber Adaptors Quick Fit Metal Straps Two useful items for connecting small diameter pipes into ducted systems. The ribbed part plugs into either 4” or 110mm ducting and either 32mm or 50mm pipes will push directly into the inner holes. No further fixings should be required. Bung 110mm-32mm Bung 110mm-50mm Inc.vat £12.96 £14.46 Ex.vat £10.80 £12.05 Good strong metal spring clips that can be cut to size to suit the diameter required.
PAGE 17
The most common question asked is what size extractor do I need? Many manufacturers will state the volume of air required for each machine in their manual. If not, note the size of the extraction port and use the chart below outlet size 50 100 125 150 200 volume of air reqd 200 m³/hr 700 m³/hr 1100 m³/hr 1600 m³/hr 2800 m³/hr Example: for a single machine with a 100mm port an extractor of a minimum of 700m³/hr will be sufficient.
PAGE 18
Numatic £124.96 Numatic Easy Ride AiroBrush Ex.vat: £104.13 Code: 508316 The AiroBrush is an exceptional floor nozzle developed to provide quick and efficient carpet care. The rotary action is especially effective for the removal of threads and pet hairs. It grooms the whole carpet and will allow power brush results where uprights can rarely go. A truly high performance power brush suitable for the Henry range and other machines with a 32mm pipe fitting. Easy Ride AiroBrush is also available.
PAGE 19
Vacuum Cleaners £244.96 Ex.vat: £204.13 Code: 508330 2 £499.96 Ex.vat: £416.63 Code: 610326 Numatic NVDQ900-2 Vacuum Cleaner Numatic NQS250B-B2 Vacuum Cleaner £289.96 The all-steel construction of today’s NQS250B model is where the Numatic story started. They learnt from the 250 that the commercial cleaning business was rough and tough but, having said that, the majority of their early machines are still working 20 or more years later. After all those years the NQS250B is better than ever.
PAGE 20
Wet & Dry Vacuum Cleaners 2 £249.96 Ex.vat: £208.30 Code: 500418 £189.96 £959.95 Ex.vat: £158.30 Code: 990003 Ex.vat: £799.96 Code: 702712 Numatic George GVE370-2 Wet or Dry Vacuum Cleaner The true “all in one” machine that is totally at home be it in the wet or the dry. This classic “all in one” is genuinely the family friend, dry vacuuming, wet vacuuming, scrubbing and drying hard floors, deep cleaning the carpet, cleaning the upholstery, unblocking the sink, you name it, George is your man.