Code: 501227 FT-1000 Downdraft Table Axminster Tool Centre, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH www.axminster.co.
CONTENTS: IMPORTANT SAFETY RULES -------------------------------------------------------------- 2 IMPORTANT SAFETY RULES FOR DUST COLLECTORS ------------------------- 3 GROUNDING INSTRUCTIONS ------------------------------------------------------------- 4 SPECIFICATIONS ------------------------------------------------------------------------------ 5 CONTENTS OF PACKAGE ------------------------------------------------------------------ 6 CONTENTS OF PARTS BAG -------------------------------------------------
IMPORTANT SAFETY RULES Wood working can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result.
IMPORTANT SAFETY RULES FOR DUST COLLECTORS WARNING: Basic precautions should always be 10. DO NOT pull the dust collector by the power cord. followed when using your dust collector. To reduce the NEVER allow the power cord to come in contact risk of injury, electrical shock or fire, comply with the with sharp edges, hot surfaces, oil or grease. safety rules listed below: 11. 1. READ and understand the instruction manual the power cord.
GROUNDING INSTRUCTIONS The appliance must be grounded, if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having equipment-ground conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
SPECIFICATIONS: Motor---------------------------------------------------------------------------------------------------------------1/2 HP AMP------------------------------------------------------------------------------------------------------------------ 6 A Motor Speed--------------------------------------------------------------------------------------------------- 1650 RPM Suction Capacity---------------------------------------------------------------------------------------------- 1790 CFM Impeller Si
CONTENTS OF PACKAGE FT-1000: NO. Description Q’TY Part List NO. NO. Description Q’TY Part List NO. A Main Housing 1 NO.40 F Drawer 1 NO.34 B Sucking Head Set 1 NO.17 G Filter Net 2 NO.11 C Side Cover 2 NO.19.41 H Rubber 90 NO.14 D Handle 1 NO.9 I Foot Pad 4 NO.35~39 E Sucking Board 5 NO.
CONTENTS OF PARTS BAG FT-1000: NO. Description Specification Q’TY Part List No. 3/16”x3/8” 12 NO.16 A Phillips Head Screw B Stopper 6 NO.13 C Stopper Nut 6 NO.15 D Triangular Knob 1/4”x1/2” 2 NO.18 E F Flat Head Screw Foot Pad 1/4”x5/8” 2 4 NO.8 NO.
ASSEMBLY INSTRUCTION: STEP1-1: Place the Sucking Head Set (NO.17) on the Main Housing (NO.40) and tight with Phillips Head Screws. (NO.16) See (FIG.1) STEP1-2: Place the Pad & Accessory (NO.35~NO.39) and fixing the Pad & Accessory (NO.35~NO.39) on the machine bottom as shown in FIG.1-2. . (FIG.1) STEP2-1. 取出側封蓋板(左)(NO.5).側封蓋板(右) (NO.4)將插銷(NO.32)與機體板扣位置栓上,如圖 (FIG1-2) . STEP2-1: Assemble Left Side Cover (NO.19) and Right Side Cover (NO.41) on the Main Housing with Pins. (NO.6) See (FIG.
EXPLODED DIAGRAM FT-1000: 9
FT-1000 Part List: NO.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local recycling centre and place into the appropriate recycling bin. Only for EU countries Do not dispose of electric tools together with household waste material.
