Operating instructions

Index of Contents
2
Introduction/Warranty
Page
Warning
The symbols below advise that you follow the correct safety procedures when
using this machine.
Dust mask
should be worn
Ear protection
should be worn
Eye protection
should be worn
Fully read manual
and safety instructions
before use
Keep hands away
from moving parts
and cutting area
WARRANTY
All component parts of Excalibur by Axminster Tool Centre are carefully tested and
inspected during all stages of production, and each unit is thoroughly inspected
upon completion of assembly. Because of our commitment to quality and
customer satisfaction, Axminster Tool Centre agrees to repair or replace, within
a period of 2 years from date of purchase, any genuine part or parts which, upon
examination, prove to be defective in workmanship or material. In order to obtain
this warranty, all defective parts must be returned freight pre-paid to Axminster
Tool Centre. Repairs attempted without our written authorization will void this
warranty. Disclaimer: The information and specifications in this manual pertain to
the unit as it was supplied from the factory at the time of printing. Because we are
committed to making constant Improvements, Axminster Tool Centre reserves the
right to make changes to compo nents, parts or features of this unit as deemed
necessary, without prior notice and without obligation to install any such changes
on previously delivered units. Reasonable care is taken at the factory to ensure
that the specifications and information in this manual corresponds with that of
the unit with which it was supplied. However, special orders and “after factory”
modifications may render some or all information in this manu al inapplicable to
your unit. Further, as several generations of this scroll saw and several versions of
this manual may be in circulation, if you own an earlier or later version of this unit,
this manual may not depict your unit exactly. If you have any doubts or questions
contact your retailer or our support line with the model and serial number of your
unit for clarifi cation.
Index of Contents 02
Introduction/Warranty 02
Rules For Safe Operation 03
Safety Instructions 04
Electrical Requirements 05
Identification of Main Parts & Components 06
Unpacking & Set Up 07
Installation & Assembly 07-08
Choosing & Installing a Saw Blade 08-09-10
Operating Instructions 10-11-12-13
Maintenance, Adjustments & Servicing 14-15
Changing the Fuse 15
Specifications 15
Optional Accessories 16
Stand Assembly 17
EX-16 Parts Breakdown/List (A,B) 18-19-20-21
EX-21 Parts Breakdown/List (A,B) 22-23-24-25
EX-30 Parts Breakdown/List (A.B) 26-27-28-29
EX-16, EX-21, EX-30 Drive Assembly Breakdown/List (C) 30-31
Wiring Diagram 32
Notes 33-34-35