User manual

315
Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/woodjoining
8
Lamello Zeta Biscuit Connectors
Low cost span style intermediate stabilising biscuit (pre-
assembly or gluing with Tenso).
Used as an aligning or jointing biscuit, the 7mm thick flat Bisco
is designed to work with the P-system groove produced by
the Zeta or CNC system, providing alignment for assembly and
greater shear strength, it can be glued in place if required. The
Bisco is a flat 7mm plastic biscuit and is available in two sizes.
Bisco P-14 is 65mm x 27mm
Bisco P-10 is 52mm x 19mm
Bisco Biscuit
Bisco P-14 Biscuit Pack 80 £22.96 £19.13 950870
Bisco P-14 Biscuit Pack 300 £67.96 £56.63 950871
Bisco P-10 Biscuit Pack 80 £19.96 £16.63 503848
Bisco P-10 Biscuit Pack 300 £59.95 £49.96 503849
Inc.vat Ex.vat Code
Self-locking, self-clamping for rapid assembly with or
without glue
This is a self-locking connector with a very high clamping
force. Part of the Lamello Zeta fitting range, self-anchors in the
‘P’ system groove. This invisible fitting simply locks together
offering a tight connection that requires no further clamping or
pressure. You can use it alone, or with other ‘P’ style connectors,
with or without glue. It is especially suitable for 90° joints.
Groove depth 14mm.
Tenso P-14 Connector
Tenso Connector Pack 80 £52.96 £44.13 506102
Tenso Connector Pack 300 £174.96 £145.80 506103
Tenso Connector Pack 1,000 £529.96 £441.63 506632
Inc.vat Ex.vat Code
The Lamello P-System offers more than a standard biscuit joint. The special groove is cut by Zeta biscuit jointer (or CNC machine) giving an undercut function to allow for the fitting of special concealed
Clamex P connectors that slide into the ‘T’ slot produced. The connector also clamps, so no additional clamping methods are required. Almost totally concealed; the only visible sign is a single 6mm hole,
making it ideal for many applications such as furniture, shop fitting and exhibitions. It is also suitable for solid wood and manmade boards, overcoming many design issues.
Knockdown back to back/shelf connectors
The Medius is a centre panel connector, allowing you to put
them back to back in a board with a thickness as thin as 16mm.
For example, in shelf units where two shelves meet a dividing
panel at the same height. The install the deeper lever half of the
Medius into the ends of the shelf. Install the shallower female
half into the dividing panel. Thanks to its minimal depth and
crescent-shape, it is possible to fit the female half back-to-back
in a dividing panel measuring just 16mm. Medius works on
exactly the same principal as the Clamex P-14/P10. It forms a
strong secure joint without the need for screws or glue.
Medius - lever half – 66mm × 14.5mm (P-14 setting)
female half - 52mm × 7.5mm (P-10 setting)
Lamello Clamex P Medius
Connector for Zeta
Clamex P Medius - Pack 80 £117.96 £98.30 502891
Clamex P Medius - Pack 300 £379.96 £316.63 502892
Inc.vat Ex.vat Code
Simple push fit covers to help hide the 6mm hole that allows
access the Clamex locking mechanism. Available in packs of 100
and a choice of five colours: black, white, pine, beech and brown.
Lamello Clamex Covercaps
White (Pkt 100) £6.96 £5.80 210578
Black (Pkt 100) £6.96 £5.80 210579
Brown (Pkt 100) £6.96 £5.80 210580
Beech (Pkt 100) £6.96 £5.80 210581
Pine (Pkt 100) £6.96 £5.80 210582
Inc.vat Ex.vat Code
This Lamello tungsten tipped blade is a top of the range
industrial quality blade for trade or professional use. Cuts 4mm
slot for biscuits and other connectors. Diameter 100mm bore
22mm. (Fits Lamello; Classic C3, TOP20/21 and Zeta as well as
many other makes of biscuit jointer).
Lamello Biscuit Jointer Blade
TCT Blade £89.95 £74.96 132000
Inc.vat Ex.vat Code
Lamello Clamex
Connector for Zeta
Perfect for knock down and fast assembly
One amazing connector with a host of uses. Clamex P connectors
make solid joints without the need for glue, screws or additional
clamps and they can be detached for transit or storage of your
work piece. Once the joint is together, only an almost invisible
6mm hole remains as evidence. This extremely clever jointing
system overcomes so many design problems and gives you quick
simple secure joints every time.
Biscuit shaped fitting with a ‘T’ profile that slides in place, without
the need for screws or glue. Two small studs align the connector.
A hex key inserted into the 6mm hole operates the pivot lever
to bring together and lock the joint firmly and securely. Clamex
P connectors are fibreglass reinforced plastic, they have a tensile
strength of 160kg.
Clamex P is available in two sizes, P-14 for general use and the
shallower P-10 for thinner boards.
P-14: length 66mm x width 29mm (slot depth each half 14.5mm)
P-10: connecting 13mm panels; length 52mm x width 19mm (slot
depth each half 9.7mm) (requires P-10 drill guide.)
Clamex P-14 Connector (Pkt 80) £89.95 £74.96 506628
Clamex P-14 Connector (Pkt 300) £284.95 £237.46 506629
Clamex P-14 Connector (Pkt 1,000) £879.96 £733.30 506630
Clamex P-10 Pack 80 £107.95 £89.96 503672
Clamex P-10 Pack 300 £359.95 £299.96 503673
Clamex P-10 Pack 1,000 £1099.95 £916.63 503674
Inc.vat Ex.vat Code
This drill jig is suitable for drilling the 6mm hole required to gain
access to the locking mechanism for the Lamello Clamex S and
Clamex P joint. Use for angles up to 22.5°. Supplied with drill
bit and depth-stop collar. Use with Lamello P-14, P-15 and P-10
connectors.
Lamello P-System Drill Jig P-14,
P-15 and P-10
P-System Drill Jig and Drill P-14, P-15 and P-10 £56.95 £47.46 506631
Inc.vat Ex.vat Code
Wood Joining.indd 315 27/11/2014 15:39