User manual

ManualsBrandsAxminster ManualsPower ToolDomino DF 500 Q

311

Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/woodjoining

UJK Pocket Hole Jig Accessories

UJK Washer Head Pocket Hole Screws

Especially developed for the UJK Pocket Hole Jig, this clamp will hold the portable plate securely

to your work whilst drilling and can also be used to clamp the joint together whilst ﬁxing. With a

quick action and very secure clamp it has two large 45mm face pads that spread the clamp load.

Opening to a maximum of 75mm.

UJK Technology

Clamp for

Pocket Hole Jig

UJK Pocket Hole Clamp £16.96 £14.13 503727

Inc.vat Ex.vat Code

This extraction outlet ﬁts onto the rear of the jigs using a couple of machine screws (supplied).

With an extractor conected, the wotrkshop is cleaner and more importantly drilling is cleaner and

quicker. Outlet diameter: o/d 42mm, i/d 35mm.

UJK Technology

Extraction Outlet

for Pocket Hole Jig

Pocket Hole Jig Extraction Outlet £19.45 £16.21 503801

Inc.vat Ex.vat Code

UJK Technology Portable

Plate for Pocket Hole Jig

This plate allows you to take the jig off the bench-mount in situations when the jig needs to go

to the work rather than the other way around. It registers the jig on the end of the workpiece

maintaining accuracy when drilling the holes. We recommend its use in conjunction with the

pocket hole jig clamp.

Portable Plate £3.25 £2.71 503802

Inc.vat Ex.vat Code

This clamp allows you to align the pocket joint exactly,

whilst you drive the ﬁrst screw. The 9.5mm pin ﬁts into a

drilled pocket hole and clamp tightened. The ﬁne thread

has a quick release button for rapid adjustment when

using different material widths.

UJK Technology Alignment

Clamp for Pocket Hole Jig

UJK Alignment Clamp £15.46 £12.88 502710

Inc.vat Ex.vat Code

Extra long, 1/4” hex shanked T20 Torx

screwdriver bits, a choice of 80mm or

120mm in length. Suitable for all T20 Torx

head screws and UJK pocket hole washer

screws. Sold in packs of 2.

UJK Technology T20 Screwdriver Bits

80mm - Pkt 2 £2.46 £2.05 503456

150mm - Pkt 2 £3.46 £2.88 503457

Inc.vat Ex.vat Code

Material: Zinc plated steel screws made to DIN 1.1133, wax

coated

Thread Type: The coarse thread, suits soft woods and other

materials such as pine, MDF, melamine and plywood. The ﬁne

thread screws suit hardwoods such as oak, maple, walnut and

cherry.

Head Style: UJK screws use a Torx T20 recess, chosen for all

the advantages the Torx drive system offers. The washer head

style provides a large amount of surface area to seat ﬁrmly in

the bottom of the pocket, especially for plywood or pine and

ensures that the screw is not overdriven.

Timber thickness:

25mm screws to join timber 13mm to 19mm thick

32mm screws to join timber 19mm to 22mm thick

38mm screws to join timber 22mm to 32mm thick

50mm screws to join timber 32mm to 35mm thick

62mm screws to join 38mm thick timber

Suitable for use with pocket hole jigs including Kreg.

Pack contains:

Fine thread

3.5 x 25mm x 100

3.5 x 30mm x 100

4 x 30mm x 100

4 x 35mm x 100

Coarse thread

4 x 25mm x 150

4 x 30mm x 150

4 x 35mm x 100

4 x 50mm x 100

4 x 60mm x 100

Washer Head

Pocket Hole Screws Trade Pack

Trade Pack £23.95 £19.96 502479

Torx T20 Screwdriver Bit 80mm - Pkt 2 £2.46 £2.05 503456

Torx T20 Screwdriver Bit 150mm - Pkt 2 £3.46 £2.88 503457

Inc.vat Ex.vat Code

Coarse Thread

4 x 25mm Coarse Thread Qty 500 £14.46 £12.05 501567

4 x 25mm Coarse Thread Qty 100 £3.66 £3.05 501568

4 x 30mm Coarse Thread Qty 500 £14.26 £11.88 501569

4 x 30mm Coarse Thread Qty 100 £3.66 £3.05 501570

4 x 35mm Coarse Thread Qty 500 £15.96 £13.30 501571

4 x 35mm Coarse Thread Qty 100 £3.96 £3.30 501572

4 x 50mm Coarse Thread Qty 500 £19.96 £16.63 501573

4 x 50mm Coarse Thread Qty 100 £4.75 £3.96 501574

4 x 60mm Coarse Thread Qty 500 £22.45 £18.71 501575

4 x 60mm Coarse Thread Qty 100 £5.26 £4.38 501576

Inc.vat Ex.vat Code

Fine Thread

3.5 x 25mm Fine Thread Qty 500 £9.96 £8.30 501559

3.5 x 25mm Fine Thread Qty 100 £2.65 £2.21 501560

3.5 x 30mm Fine Thread Qty 500 £10.45 £8.71 501561

3.5 x 30mm Fine Thread Qty 100 £2.86 £2.38 501562

3.8 x 30mm Fine Thread Qty 500 £10.45 £8.71 501563

3.8 x 30mm Fine Thread Qty 100 £2.86 £2.38 501564

3.8 x 35mm Fine Thread Qty 500 £11.46 £9.55 501565

3.8 x 35mm Fine Thread Qty 100 £3.06 £2.55 501566

Inc.vat Ex.vat Code

UJK Technology

Extended Nose

Quick Change Shank Pocket Hole Drill

Extended Nose Drill Bit £24.96 £20.80 506508

Inc.vat Ex.vat Code

A high quality hex shank stepped drill bit designed for use with pocket hole jigs. A parabolic ﬂute

design and unique longer tip proﬁle result in a stronger joint and fast production. The extended

tip measures approximately 23mm resulting in an increased thread depth and a ﬁrmer grip when

using 50 or 60mm screws in thicker material. The shank is machined with a double groove and is

compatible with all makes of tools. Suitable for UJK Technology, Trend and Kreg pocket hole jigs.

UJK Pocket Hole Plug Cutter

Plug Cutter £9.96 £8.30 506504

Inc.vat Ex.vat Code

Make your own pocket hole plugs. Simply use the plug cutter in a pillar drill to create

you own plugs using matching or contrasting timber, glue them in, trim using a ﬂush

cut saw and sand to a ﬁnish. Cuts 9.5mm (3/8”) diameter plugs 55mm long.

UJK Technology

Pocket Hole Cobalt Drill Quick Change Shank

Pocket Hole Cobalt Drill £25.95 £21.63 507244

Drill Bit Stop Collar £2.46 £2.05 503834

Inc.vat Ex.vat Code

A high quality Quick Change shanked M35 cobalt stepped drill bit, designed for use with pocket

hole jigs. Parabolic ﬂute design and unique tip proﬁle for fast production. Made in Austria. Suitable

for UJK, Trend and Kreg pocket hole jigs.

Wood Joining.indd 311 27/11/2014 15:38