Instruction manual

ManualsBrandsAxminster ManualsDrillD.R.O. Micro Drill

530

axminster.co.uk/signup for our exclusive email offersCall 03332 406406

Multi-Tool Kits

Cylinder Rasp (Rounded Head) 7.5 x 12mm

£17.94 £14.95 475922

Conical Rasp 8 x 12mm £17.94 £14.95 475923

Needle Rasp 4 x 19mm £14.94 £12.45 476147

Inc.vat Ex.vat Code

Proxxon TCT Rasps

Sculpting, cleaning and smoothing of wood

and ﬁ bre glass. Precision working on and

reﬁ ning of ﬂ utes, grooves and furrows.

Extremely sharp and very easy to handle. The material can be worked

without physical effort no matter whether it is cut with or against the

grain. High stability and easy to clean with a blow torch ﬂ ame. Also

for use on rubber, foam and silicone. Working speed range 5,000 ~

20,000rpm, 3.2mm shank. Not for use on metal.

Especially suitable for polishing

precious metals as well as for

tool making and precision

engineering. Supplied as a pack

with four discs, 22mm diameter

by 6mm thick and including

an arbor. Shank diameter

2.35mm(3/32”).

Polishing Pad Set £5.45 £4.54 477318

Inc.vat Ex.vat Code

Proxxon Flexible Polishing Pad Set

For polishing metal, glass, precious

metals, porcelain and plastic. Consists

of three felt polishing bits (cylinder,

cone, wheel), three silicon polishing bits (bullet, cylinder and

wheel). Cotton wool polishing wheel, chamois bufﬁ ng wheel and

polishing paste (include 2.35mm arbor).

Complete Polishing Set £13.44 £11.20 476719

Inc.vat Ex.vat Code

Proxxon

Complete

Polishing Set

Diamond Burr Set £4.94 £4.12 410037

Inc.vat Ex.vat Code

3.2mm shank diameter diamond burrs perfect for glass engraving

and endless other applications where hard materials need to be

deburred, reshaped or removed.

Diamond

30 Piece

Burr Set

These bits are covered with diamond

particles and are used for ﬁ ne detail work

on ceramics, glass, hardened steel, semi-

precious stones etc. Choice of 2 x 1.8mm

points and 2 x cutting discs. All with shaft

diameter of 2.35mm(3/32”).

Ball Point 1.8mm (Pkt 2) £3.44 £2.87 202323

Diamond Cylinder 5.0 x 1.8mm £2.04 £1.70 202324

Inc.vat Ex.vat Code

Proxxon

Diamond Cutters

HSS router bits with 3.2mm shanks comprising 3mm, 4.5mm,

6mm straight, 3mm radius veining, 3mm radius beading, 6mm

vee groove, 2.4mm guided beading, 3.2mm guided beading,

4.8mm guided cove and 3.3mm guided rebate cutter. (Set of 10).

Not to be used without router attachment or table.

Set of 10 HSS Cutters £24.95 £20.79 600499

Inc.vat Ex.vat Code

Miniature HSS Router Bits

Extremely sharp and very easy to handle. The material can be worked

For polishing metal, glass, precious

metals, porcelain and plastic. Consists

of three felt polishing bits (cylinder,

3.2mm shank diameter diamond burrs perfect for glass engraving

Diamond

Inc.vat

Ex.vat Code

Proxxon Flexible Polishing Pad Set

Dura-GRIT

Woodcarving Set £69.95 £58.29 210575

Inc.vat Ex.vat Code

Starter Set £49.94 £41.62 474769

Inc.vat Ex.vat Code

Dura-GRIT are powerful, long lasting cutting and shaping

tools that ﬁ nish as they cut! They are unique, strong, carbide

coated steel shapes, mounted on 3.2mm(1/8”) heavy duty

mandrels. Made with tungsten-carbide grit, braze welded to

steel. Dura-GRIT tools are extremely strong and aggressive.

The tungsten-carbide grit won’t tear loose and remains sharp

over a very long period of use. These tools need little clean-

ing, however, residue can be removed by running the tip into

the bristles of a wire/stainless brush or into uncured rubber.

Cleaning the burr will restore the cutting surface to virtually

new and extend the working life of the tool.

Starter Set contains:

• 60 Grit 32m(1.1/4”) dia.

Mushroom Shaping Wheel

• 80 Grit 25mm(1”) dia. Cutting Wheel

• 120 Grit 13mm(1/2”) dia. Drum Sander

• 80 Grit 3mm(1/8”) dia. Pointed Burr

• 3.2mm shanks

Dura-GRIT

4 Piece

Starter Set

• Six piece, long lasting, high performance carbide burrs 3.2mm

(1/8”) diameter shanks

• Ideal for carving, shaping, hollowing, detailing, sanding

Woodcarving Set contains:

• 80 Grit 9mm dia Conical Tip Burr

• 80 Grit 12.7mm dia Aspirin Tip Burr

• 80 Grit 9mm dia Flat Head Burr

• 80 Grit 9mm dia Rounded End Burr

• 80 Grit 9mm dia Ball End Burr

• 80 Grit 9mm dia Hollow Tip Burr

Dura-GRIT 6 Piece Woodcarving Set

Powerful, long lasting cutting and shaping tools with 3.2mm

shafts that ﬁ nish as they cut. They have a very long life and the

grit will not tear loose. For use on hard and soft woods, ﬁ bre,

laminates, plastics, carbon ﬁ bre, leather, rubber and more. Unique,

strong, carbide coated steel shapes, mounted on strong, heavy

duty mandrels. Shank 3.2mm 1/8”

Flat Head Bit. 9mm dia. 80 grit £11.94 £9.95 202318

Pointed Bit 3mm dia. 80 grit. £9.95 £8.29 202319

Pointed Bit 3mm dia.120 grit. £9.95 £8.29 202320

Inc.vat Ex.vat Code

Dura-GRIT Carbide Pointed Burr

10mm Sphere End Burr 80 grit £11.94 £9.95 202443

9mm Round End Burr 80 grit £11.94 £9.95 202442

3mm Straight Burr 80 grit £9.95 £8.29 202438

9mm Conical Burr 80 grit £11.94 £9.95 202437

9.6mm Hollow Tip Burr £11.94 £9.95 701282

Ball End Burr £11.94 £9.95 701281

Cylindrical Tip Burr £11.94 £9.95 701280

Inc.vat Ex.vat Code

Dura-GRIT Carbide Burrs

80 grit burrs 10mm(3/8”) sphere, 9mm rounded end, 9mm conical

tip, aspirin tip, ball end, hollow tip and 3.2mm(1/8”) straight.

3.2mm (1/8”) shanks.

13mm dia. 80 grit Drum Sander £11.94 £9.95 202440

Inc.vat Ex.vat Code

13mm(1/2”) hollow tip 80 grit sanding drum. Powerful, long

lasting cutting and shaping that ﬁ nish as it cuts. With 3.2mm(1/8”)

shank.

Dura-GRIT

Sanding Drum

32mm Shaping Wheel. 60 grit £13.94 £11.62 202441

32mm Flat Cutting Wheel £12.95 £10.79 202439

25.4mm Flat Cutting & Shaping Wheel £13.94 £11.62 701464

Inc.vat Ex.vat Code

Fast and effective leaving a

clean ﬁ nish, these Dura-Grit

wheels are great for

modelling, woodcarving

and any small shaping task.

• 32mm(1.1/4”) 60 grit ﬂ at cutting

wheel and mushroom shaping wheel

• 25.4mm(1”) ﬂ at cutting and shaping wheel is

coated on both sides

• Also suitable as a cut off wheel

• 3.2mm (1/8”) shank

Dura-GRIT Cutting

& Shaping Wheels

Dremel have come up with a

simple and quick solution for

anyone who uses cut off wheels

in a multi tool, the ‘Speedclic’ system, the

mandrel has a quick release mechanism to

allow the special 35mm ﬁ breglass reinforced cut

off wheels to be ﬁ tted without the need for additional tools and

whilst still ﬁ tted to the multi tool. The mandrel has a 3.2mm shank

and is supplied with 2 x 35mm cut off wheels. Additional cut off

wheels are available separately in packs of 5.

Speed Clic System Starter kit £10.94 £9.12 212289

Cut-Off Wheels (Pkt 5) £7.64 £6.37 701849

Inc.vat Ex.vat Code

anyone who uses cut off wheels

in a multi tool, the ‘Speedclic’ system, the

mandrel has a quick release mechanism to

allow the special 35mm ﬁ breglass reinforced cut

Dremel Speed

Clic System

Starter kit

For sharpening, deburring and general purpose grinding and

working of most metals. There are three individual cutters in packs

of three. The cylinder is 8mm diameter and 13mm long, the ball is

9mm and the ﬂ at bit is 13mm diameter. All have 3mm shanks.

Grinding Bit Cylinder (Pkt 3) £1.90 £1.58 210514

Grinding Bit Ball (Pkt 3) £1.90 £1.58 210515

Grinding Bit Flat (Pkt 3) £1.90 £1.58 210516

Inc.vat Ex.vat Code

Proxxon

Corundum

Grinding Bits

- Packs 3

For sharpening, deburring and general purpose grinding and

working of most metals. There are four shapes each supplied in

packs of ﬁ ve. The cylinder is 2.5mm diameter, the ball 5mm, asprin

6mm and taper 7mm. All have 2.35mm(3/32”) shanks.

2.5mm (5) £2.54 £2.12 202341

5mm (5) £2.54 £2.12 202340

6mm (5) £2.54 £2.12 202342

7mm (5) £2.54 £2.12 202343

Inc.vat Ex.vat Code

Proxxon Corundum Grinding

Points - Packs 5

19_Modelling Tools 525.indd 530 29/11/2013 15:06