Instruction manual

Stained Glass Tools Jewellers Tools
541
19
*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406
A spring-loaded cam action jaw
fi rmly grips lead came whilst
stretching it. Removing kinks
and bends, makes it slightly more
rigid, easier to work with and results in a better fi nished
article. If wished it is possible to screw the vice to your bench
permanently. Made of die-cast alloy 100mm long by 40mm wide.
Based on the Weller SP80NUK is a high performance, 80W, heavy-
duty soldering iron the kit is ideal for stained glass work. It’s useful
for repairs to existing pieces or creating new Tiffany lampshades,
terrariums or attractive pendants. Three LED’s deliver light to the
application for superior accuracy. The soldering iron delivers both
comfort and fl exibility. A round, soft-grip, non-slip handle design
helps relax the hand during extended use. To ensure long life, the
soldering iron comes with a stainless steel heater, impact resistant
housing and heat resistant LED’s. Working temperature 482C
(900F). Supplied with long Life 10mm MTG20 soldering tip, SG10
stained glass tip and a stand.
Stained Glass Iron £33.95 £28.29 910387
Inc.vat Ex.vat Code
Weller HK2 Stained
Glass Soldering
Iron 80W
A professional grade lubricated glass cutter with a tungsten
carbide wheel that stores a supply of oil in the knurled handle.
The constant supply of oil keeps the glass open and makes for a
very clean break.
Glass Cutter £5.64 £4.70 100143
Inc.vat Ex.vat Code
Deluxe Lubricated Glass Cutter
An essential aid for cutting out glass for circular pictures. A
lever-operated rubber suction pad holds the cutter securely to
the glass while the cutting wheel is traversed around the circle,
scribing out a clean cut in the glass. The brass bar is calibrated in
metric and gives a maximum radius of 300mm.
Glass Cutter £16.74 £13.95 100144
Inc.vat Ex.vat Code
Axminster Circular Glass Cutter
and bends, makes it slightly more
rigid, easier to work with and results in a better fi nished
article. If wished it is possible to screw the vice to your bench
Lead Vice £9.44 £7.87 952860
Inc.vat Ex.vat Code
Leponitt
Lead Vice
Leponitt Lead Knife
This knife is 125mm long with an extremely sharp stainless steel
blade. The curved blade is double riveted to a wooden handle.
The 60mm radius curve makes cutting lead came easier requiring
only steady pressure and a rocking motion. Running the edge of
the blade across some wax prior to cutting helps give an even
cleaner fi nish. The top of the handle has a hammer button for
tapping horseshoe nails to hold your workpiece.
Lead Knife £15.35 £12.79 952861
Inc.vat Ex.vat Code
The all-plastic construction makes these pliers light in weight
and highly unlikely to damage your glass. The top jaw has an
alignment mark to ensure the cut is in the correct position within
the jaws. A gentle squeeze will result in a clean break. These pliers
work equally well on long straight cuts or very short cuts that are
diffi cult to snap by hand. Use for stained glass or mirrors only, not
for use on tiles, 200mm long, 30mm jaw depth.
Running Pliers £7.94 £6.62 952864
Inc.vat Ex.vat Code
Leponitt Running Pliers
Leponitt
Grozier Pliers
Grozier Pliers £10.94 £9.12 952863
Inc.vat Ex.vat Code
• Dual function stained glass pliers
• Use to snap thin strips after scoring
• Nibble and trim from external or internal curves
• Finely serrated jaws, heat-treated and hardened
• Chemically blackened for protection
• Spring loaded handles for easy operation
• Handles with dipped coating for comfort
• Length 160mm, jaw depth 30mm
Lead Dykes £10.55 £8.79 952865
Inc.vat Ex.vat Code
• Acute angle cutting edges specifi cally
for lead cutting
• Flat face to ensure a clean fi nish
• Handy for snipping and carrying out repairs
• Use for fi ne trimming
• High carbon steel hardened jaws
• Sprung-loaded handles with comfort grips
• Overall length 165mm
Leponitt
Lead Dykes
• Hammer with three interchangeable heads
• Spare stored at the end of the handle
• Two plastic heads, one hard, one soft
• Steel head for nails and general use
• Heads simply screw into place
• One-piece glass fi bre reinforced head and handle
• 285mm long, 25mm diameter heads, weight 268g
Leponitt Triple
Headed Hammer
Stained Glass Hammer £16.44 £13.70 952862
Inc.vat Ex.vat Code
Picture Framer’s/Glazier’s Hammer £34.94 £29.12 952990
Inc.vat Ex.vat Code
• Stainless-steel head with rotating triangular face
• One face fl attens against the glass
• Driving head slides on the glass or picture backing
• Hold the handle at a convenient angle
• Weight 130g, 270mm long
Picture Framer’s/Glazier’s Hammer
• Hammer with three interchangeable heads
Ex.vat Code
The legs of these dividers are more robust compared to normal
dividers of this type. These are useful not only to measure, but also
to scribe arcs. The legs pivot on a roller, a bow spring automatically
opens the legs on loosening the adjusting nut. The adjusting nut is
the split nut and collet type for quick setting. The maximum opening
is 68mm, with hardened and ground points. Made in Germany.
Dividers 75mm £8.45 £7.04 502426
Inc.vat Ex.vat Code
Jeweller’s
75mm Dividers
Jeweller’s Archimedian Drill £4.94 £4.12 502421
Inc.vat Ex.vat Code
• Central helical shaft with spring-loaded sliding collar
• Shaft rotates approximately 1.1/4 times per stroke
• Holds drill bits up to 1.0mm diameter
• Collet chuck ensures secure grip of fi ne dill bits
• Swivelling fi nger rest for ease of use
Jeweller’s Archimedian Drill
Jeweller’s Brass Pocket Caliper
Brass Pocket Caliper £8.94 £7.45 502427
Inc.vat Ex.vat Code
• Solid brass, handy pocket caliper
• Milled dovetail slot gives smooth action
• Permanently engraved graduations in both metric and imperial
• Imperial scale direct reading 3.1/4” x 1/16”
• 80mm metric scale with vernier scale readable to 0.1mm
• Ideal tool for quick external measurements or quick
comparisons
• Made in Germany
• Length 100mm, jaw depth 20mm
Jeweller’s Double Ended Scriber
A double-ended slim scriber only 100mm long. The 5mm
in diameter central portion has a knurled grip. The ends are
hardened and very sharp. Used in combination with a steel ruler
or an engineer’s square for marking out, the fi ne points ensure
accuracy. Being small and slim, this scriber is useful for freehand
marking out of a design for engraving or piercing.
Double Ended Scriber £8.45 £7.04 502460
Inc.vat Ex.vat Code
Emery Sticks Half Round (Pkt 3) £5.94 £4.95 502434
Emery Sticks Three Square (Pkt 3) £5.94 £4.95 502435
Inc.vat Ex.vat Code
• Hardwood sticks coated with silicon carbide paper
• 250mm long
• 12mm wide half-round or 10mm three-square (triangular)
• Each pack contains three sticks
• One each 180, 240 and 1,200 grit
Jeweller’s Emery Sticks
19_Modelling Tools 525.indd 541 29/11/2013 15:17