Instruction manual

537
19
Order online axminster.co.uk/modelling
Proxxon MICROMOT 12V Power Tools
FBS12/E Drill/Grinder 12V £39.95 £33.29 475142
Inc.vat Ex.vat Code
STS 12/E Jigsaw £46.94 £39.12 475014
Inc.vat Ex.vat Code
Proxxon PS 13 Pensander 12V
The PS 13 Pensander from Proxxon is a great tool for the model
maker and miniaturist. It is ideal for working on surfaces in
recesses, slots and other awkward to get at areas. The durable
special DC motor is housed in a glass fi bre reinforced polyamide
casing and the unit features a sanding stroke with a linear action,
not rotational. Supplied with four sanding arbors with straight
shanks and four angled (all different shapes) as well as three
sheets of pre-profi led self adhesive sanding pads. The sheets
are of grits 180, 240 and 400 with fi ve of each shape per sheet.
N.B. A mains adaptor of at least 1.0A at 10-18VDC is required. We
recommend Proxxon power supplies NG2/E or NG5/E.
PS 13 Pensander 12V £26.94 £22.45 475318
180 grit sanding Sheets (Pkt 5) £5.15 £4.29 477426
240 grit sanding Sheets (Pkt 5) £5.15 £4.29 477427
400 grit sanding Sheets (Pkt 5) £5.15 £4.29 477428
Inc.vat Ex.vat Code
Ideal for curved cuts in wood (up to 10mm), corrugated boards
(up to 3mm) and non-ferrous metals (up to 2.5mm). Equipped
with a powerful 12 -18 Volt fi ve-pole motor. Power consumption
100W, max. 6mm stroke. The number of strokes may be adjusted
between 2,000 and 5,000 per minute. Stable housing of fi breglass
reinforced polyamide. Includes two saw blades (coarse and fi ne).
We recommend MICROMOT mains adaptor from 2.0A for
powering the jigsaw.
Proxxon STS 12/E Jigsaw 12V
A great precision tool for delicate or small jobs which you can’t
do with a standard drill: e.g. precision drilling, milling, sanding,
polishing, brushing, de-rusting, engraving and cutting. Includes
keyless chuck (capacity 0.3 - 3.2 mm). A precision ball bearing
minimises spindle side play. Spindle lock button for bit changing
obviates the need for spanners. Recessed spindle head for
inserting MlCROMOT steel collets. Effi cient forced ventilation
cooling of motor (and electronic components in “E” model). High
quality 12 - 18 Volt, 5 pole motor with variable speed 3,000 to
15,000rpm. Fibreglass reinforced polyamide casing. For use with
MICROMOT transformers of at least 2.0A.
Slim, easily handled and light. Quick action
chuck and electronic variable speed with
feedback. Special balanced, low noise DC
motor. Length 220m. N.B. 12V
MICROMOT mains adaptor
(476059), required to operate
this tool.
MICROMOT 50/EF Rotary Tool 12V £32.45 £27.04 475368
NG 2/S Single Speed 2A Adaptor 12V £22.44 £18.70 476059
Inc.vat Ex.vat Code
Proxxon MICROMOT
50/EF Rotary Tool 12V
Proxxon
FBS 12/E Precision
Drill/Grinder 12V
The thyristor electronic speed control enables the selection
of speeds from 5,000 to 20,000rpm. Phase angle control and
feedback effect circuitry yield high torques, even at low speeds.
Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4
- 3.0 and 3.2mm are supplied. Power consumption is 40W, max.
length 220mm and weight approximately. 230g.
The body diameter of only 35 mm makes it easy to handle. The
weight of 230g, quiet and effortless drive are due to the special
motor. The ground spindle and collar bearing all contribute
to the ergonomic design. The high quality steel collets ensure
accurate clamping of the cutters. The size of the machine dictates
a 12V drive system, use of a transformer is required. MICROMOT
transformers of at least 1.0A are recommended.
50/E Drill/Grinder 12V £33.95 £28.29 475317
Inc.vat Ex.vat Code
Proxxon MICROMOT
50/E Drill/Grinder 12V
Proxxon MICROMOT 12V Power Tools
• Cutting wires (200 x 0.85mm) can be deformed for the
manufacture of any profi le by hand or pliers
• Pivoted fi xing element at top
• Extendable wire fi xing for maximum extension of 200mm
• Cutting temperature infi nitely variable
• Polarity-protected system plug
• We recommend MICROMOT mains adaptors with a capacity of
2.0A for operation
Proxxon THERMOCUT 12/E Hot
Wire Cutting Device 12V
Cutting Device 12V £38.94 £32.45 211076
Replacement Wire (Pkt 10) £15.44 £12.87 212470
Inc.vat Ex.vat Code
12V to 230V adaptor. Variable speed
control with feedback effect for
optimum tool speed and high torque
at low speeds. Three polarised sockets for
MICROMOT machines. A pair of sockets for standard banana plugs
(4mm diameter) is also supplied. Master switch for turning off the
transformer without needing to unplug. Red LED indicates ‘ready’.
PTC (Positive Temperature Coeffi cient) element prevents overload
(and plugged-in tool will not restart automatically). After cooling
down, the mains plug should briefl y be unplugged to reset the
adaptor. With storage holes for tools with 2.35mm and 3mm
shafts. Foldable tool rest for the MICROMOT tool. The mains
adaptors do not include the illustrated mill/drill units.
Mains Adaptor 12V £56.94 £47.45 474952
Inc.vat Ex.vat Code
Proxxon
MICROMOT
NG 5/E
Mains
Adaptor
Tool not included
Supplied with a tester glass so you can start
engraving immediately. GG 12 engraving tool,
12 - 18V, 20,000 rpm spindle speed, fi tted with ball
bearing. TUV approved mains adaptor (12 V, 0.5 A),
motifs and instruction booklet. Bits 1.0 and 1.8mm
diamond grinding bits with spherical head for engraving and
line work. Silicon carbide grinding bits in both conical and bullet
shape for frosting glass as well as carborundum grinding bits in
ball and cylinder shape for grinding and engraving.
Complete Engraving Kit c/w “trial glass” £37.44 £31.20 475175
Inc.vat Ex.vat Code
Proxxon Complete
Engraving Kit with Tester Glass
Tool not included
The MICROMOT mains adaptor NG2/E variable speed and NG2/S
single speed are 230V to 12V units suitable for many of the Proxxon
machines. The NORYL casing is heat resistant, which is a necessity
for transformer enclosures. The red LED indicates readiness for use
and the PTC element (Positive Temperature Coeffi cient) prevents
overload of the unit. A foldable tool rest provides a secure place for
keeping the MICROMOT tools at the ready. The mains adaptors do
not include the illustrated mill/drill units.
NG 2/E Variable Speed 2A Adaptor 12V £26.94 £22.45 475738
NG 2/S Single Speed 2A Adaptor 12V £22.44 £18.70 476059
Inc.vat Ex.vat Code
Proxxon
MICROMOT NG 2/E Mains Adaptor
A protective cover for hand held MICROMOT tools with a 20mm
collar. Protects the user when using saw blades, grinding and
polishing tools or when using a steel wire brush. Maximum tool
diameter 22mm. Clamps with a thumb wheel.
MICROMOT Cover £5.15 £4.29 950541
Inc.vat Ex.vat Code
Proxxon
MICROMOT
Protective Cover
19_Modelling Tools 525.indd 537 29/11/2013 15:12