Instruction manual

ManualsBrandsAxminster ManualsDrillD.R.O. Micro Drill

536

Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406

Proxxon 230V Power Tools

The 120 x 220mm milled table is ﬁ tted with

a fence and a scale. The solid column is

chrome plated and the headstock is of die-

cast aluminium, offering a throat capacity

of 140mm and 30mm travel. A chromed

feed lever operates via a drive disc and

ball-bearing system, offering a sensitive

feed set-up. T-bars allow simple height

adjustment as well as the ﬁ xing of the mill

drill in the 20mm bore ﬁ tting. The mill

drill collar, with scale, tilts through

90° in both directions. The drill

stand features a depth stop as well

as drilled, tapped holes for securing

the KT 70 Compound Table. The MS 4 Machine

Vice can also be ﬁ tted, it is made of die-cast zinc

with three machined sides and horizontal and

vertical V-slots in the jaws. Jaw width 50mm and

height 10mm. Maximum clamping width 34mm.

MB 140/S Drill Stand £48.95 £40.79 474982

MS4 Machine Vice £14.94 £12.45 486352

Inc.vat Ex.vat Code

The 120 x 220mm milled table is ﬁ tted with

a fence and a scale. The solid column is

chrome plated and the headstock is of die-

cast aluminium, offering a throat capacity

of 140mm and 30mm travel. A chromed

feed lever operates via a drive disc and

ball-bearing system, offering a sensitive

feed set-up. T-bars allow simple height

adjustment as well as the ﬁ xing of the mill

drill in the 20mm bore ﬁ tting. The mill

the KT 70 Compound Table. The MS 4 Machine

Proxxon MICROMOT

MB 140/S Drill Stand

Drill not

included.

Pictured with

optional MS4

Machine Vice.

Head with precision milled dovetail slide may be

tilted through 90° to give all-round versatility:

diagonal drilling, versatile without need of

special milling bits, milling diagonal slots.

Fine feed selectable, allowing ﬁ ne head feed for

milling. With dial and depth scale. Geared rack

and pinion feed for effortless drilling with 65mm

stroke. 45mm diameter drill column, 500 mm

long. Approximately 140mm throat. Machined,

solid baseplate approx. 200 x 300mm. All

drills with standard 43mm spindle collars

may be utilised directly: Bosch, Metabo,

Matika, Skil etc.

Proxxon BFB 2000

Mill/Drill Stand

Proxxon FMZ

Precision Vice

Quickly and securely clamps to work

benches and tabletops up to 60 mm

thick. Stands freely or can be ﬁ xed down.

Rotates in all directions, including ﬂ ush to

the surface. 75 mm jaws with removable rubber

covers. Zinc die-cast vice with ball and socket. Jaws

also with vertical and horizontal V-slots. Max.

clamping width 70mm. Weight 1.6 kg.

FMZ Vice £29.94 £24.95 702052

Inc.vat Ex.vat Code

Zinc die-casting with ball and socket which

rotates in all directions (even downwards).

75mm jaws with protective covers (for

delicate workpieces). Jaws also

with vertical and horizontal V-slots

for clamping round workpieces. The

strong suction cup facilitates

instantaneous ﬁ xing to any

smooth, ﬂ at surface. May also be

screwed down. Max. clamping

width 70mm.

FMS 75 Vice £29.94 £24.95 486353

Inc.vat Ex.vat Code

Proxxon FMS 75 Precision Vice

BFB 2000 Mill/Drill Stand £189.95 £158.29 474364

Inc.vat Ex.vat Code

Zinc die-casting with ball and socket which

rotates in all directions (even downwards).

75mm jaws with protective covers (for

with vertical and horizontal V-slots

for clamping round workpieces. The

Head with precision milled dovetail slide may be

tilted through 90° to give all-round versatility:

diagonal drilling, versatile without need of

special milling bits, milling diagonal slots.

Fine feed selectable, allowing ﬁ ne head feed for

milling. With dial and depth scale. Geared rack

and pinion feed for effortless drilling with 65mm

stroke. 45mm diameter drill column, 500 mm

long. Approximately 140mm throat. Machined,

drills with standard 43mm spindle collars

thick. Stands freely or can be ﬁ xed down.

Rotates in all directions, including ﬂ ush to

the surface. 75 mm jaws with removable rubber

covers. Zinc die-cast vice with ball and socket. Jaws

also with vertical and horizontal V-slots. Max.

Inc.vat

Ex.vat Code

Gas Torch £32.94 £27.45 701839

Inc.vat Ex.vat Code

Fitted with optional TCT Rasp

For working with steel, non-ferrous metals, glass,

ceramics, wood and plastic. For cutting, rough machining, grinding,

precision polishing, ﬁ ne polishing and carving wood. With 50mm

diameter discs, it features a specially balanced, 100W powerful,

quiet and long lasting DC motor. This grinder will accept the blades

for the Arbortech mini carver which further increases its potential

for texturing and carving. Supplied with a grinding disc (60 grit),

fan sander (100 grit) and cutting disc in neat plastic case.

Proxxon LWS Long Neck

Angle Grinder

Long Neck Angle Grinder - 230V £106.94 £89.12 702027

Mini Carver Blades (Pkt2) £15.44 £12.87 600491

50mm Backing Disc £4.55 £3.79 702028

Sanding Disc 50mm - 80g (Pkt 5) £3.84 £3.20 702029

Sanding Disc 50mm - 120g (Pkt 5) £3.84 £3.20 702030

Cutting Disc 50mm £2.04 £1.70 702040

TCT Rasp Disc 50mm £32.45 £27.04 702041

Fan Sander 50mm - 100 grit £4.34 £3.62 702038

Silicon Carbide Grinding 50mm Disc 60 grit

£3.05 £2.54 702037

Carborundum Grinding Disc 50mm 60 grit £3.05 £2.54 702035

Non-woven web abrasive

Medium 50mm (Pkt 5) £6.14 £5.12 702033

Inc.vat Ex.vat Code

MFB/E MICROFLAME Burner £40.94 £34.12 475091

Inc.vat Ex.vat Code

Proxxon MFB/E

MICROFLAME Burner

Super ﬁ ne ﬂ ame shape. Rechargeable with standard lighter fuel.

Used for soldering, de-soldering, brazing or heating of workpieces.

Ideal for model building, electronics, jewellery repairs, dental

laboratories, Tiffany stained glass work. Independent air and fuel

adjustments. Super ﬁ ne ﬂ ame shape with temperature attaining

1,300°C, using butane cartridge, rechargeable with standard

lighter fuel. Fitted with piezo lighter and 500ml cartridge yielding

typical usage of 120 minutes. Includes removable foot which

ensures stability on the worktop.

A compact heat gun for small jobs where a normal unit would

be far too big or aggressive. The housing is made from glass ﬁ bre

reinforced polyamide with soft grip and feet for stationary use. A

powerful 500W element produces an even temperature in two

stages, 350° and 550°, with a protection thermostat to prevent

overheating. The nozzle is made from stainless steel, three

push ﬁ t extra nozzles are provided, spot, fan and reﬂ ector.

Perfect for shaping plastics, soldering and de-soldering electrical

components or removing paint and varnish from small items.

MH 550 Micro Heat Gun £35.45 £29.54 950537

Inc.vat Ex.vat Code

Proxxon MH 550 Micro Heat Gun

Butane powered, this miniature gas torch/soldering iron performs

a multitude of task driven functions which require the delicate

touch and precision assured application of heat in one form or

another. Recharged from a cigarette lighter type bulk container,

you have a runtime of approximately 90 minutes per charge

and can achieve a maximum temperature of 550°C. VersaTip

also features a child safe ignition system, protective holster and

complete instructions. VersaTip brings precise, versatile heat right

to the point.

Supplied with an array of tips to provide soldering, hot knife,

hot blower, pyrography tip and direct ﬂ ame functions. All of

this is contained in a ﬁ tted metal storage case with a supply

of solder and pans for ﬂ ux and tip cleaning.

Dremel VersaTip Miniature Gas Torch

Model Proxxon MICRO Cutter MIC

Rating Hobby

Power 30W (230V)

Weight 300g

MICRO Cutter MIC - 230V £64.94 £54.12 950538

Replacement Cutter £8.54 £7.12 950539

Inc.vat Ex.vat Code

Proxxon Micro

Cutter MIC

This extremely handy tool will effortlessly and cleanly cut most

materials (not metals) up to 4mm thick. The powerful DC motor in

this compact tool ensures a very high cutting performance. At just

36mm in diameter making the ergonomically shaped casing easy

to hold and is easy to guide accurately. The blade is protected by

a fold up guard and the design allows you to make cut-outs very

easily. If you use wood, plastics, GRP, card, foil or other materials

then this cutter will make your task so much easier.

19_Modelling Tools 525.indd 536 29/11/2013 15:12