Specifications

ManualsBrandsAxminster ManualsGrinderAW8SRG2

524

Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406

Polishing Kits

Polishing Mops &

Adaptors

Used with a power drill or

ﬂ exible shaft, this kit provides

all you need to produce a mirror ﬁ nish on steel, stainless steel,

iron and (hard) ferrous metals. It only takes two easy steps, initially

with the 100mm, 2 section stitched mop and grey compound,

then followed by the 100mm x 25mm looseleaf, soft mop and

blue compound. The kit also includes a pigtail arbor with a 6mm

shank with which to mount the mops in a drill chuck.

Used with a power drill or

ﬂ exible shaft, this kit

provides all you need to

produce a high gloss ﬁ nish

on plastics, acrylics, ﬁ breglass and

Bakelite. The kit contains everything

needed to carry out the process in two

easy stages. Firstly, a 100mm ﬁ rm mop with brown compound and

then followed by the 100mm soft mop and buff compound. The kit also

includes a straight arbor with which to mount the mops in a drill chuck.

Used with a power drill or ﬂ exible

shaft, this kit provides all you

need to produce a mirror ﬁ nish

on chrome, EPNS (electro plated

nickel silver) and other plated metals. The kit contains everything

needed to carry out the process in two easy stages. Firstly, a 100mm

ﬁ rm mop and white compound, and then followed by the 100mm

soft mop and white compound. The kit also includes a straight

arbor with which to mount the mops in a drill chuck.

Used with a power drill or ﬂ exible

shaft, this kit provides all you need

to produce a mirror ﬁ nish on steel,

stainless steel and ferrous metals.

The kit contains everything needed

to carry out the process in three

easy stages. Firstly, a 100mm sisal mop and grey compound,

followed by the 100mm ﬁ rm mop and pink compound. Finally,

for a high gloss mirror ﬁ nish, the 100mm soft mop and blue

compound. The kit also includes a straight arbor with which to

mount the mops in a drill chuck.

Abrasive

Lap Mops

These mops have a leather reinforced central tapered hole for

mounting onto a tapered mop adaptor on a bench grinder or a

pigtail chucked in a power drill. Each mop consists of four discs of

non-woven nylon, coated with aluminium oxide abrasive. A certain

amount of ﬂ exibility means you can use them on curved surfaces.

Available in four grades, they have many uses.

Mainly intended for use on metals although some interesting effects

can be had when used on wood. The coarse grade (approx 80g) will

remove paint and heavy rust from metal and can be quite aggressive.

Medium and ﬁ ner grades (approx 120g, 180g and 320g) are great

for cleaning tools that have become rusty, bringing them back to life

and full use. The most widely used applications are producing a satin

or matt ﬁ nish on metal, or smoothing and preparing the surface

prior to ﬁ nal polishing with compound and cotton mops.

Eye protection must be worn.

Coarse (approx 80g) 150mm £10.94 £9.12 952849

Medium (approx 120g) 150mm £10.74 £8.95 952850

Fine (approx 180g) 100mm £7.94 £6.62 503948

Fine (approx 180g) 150mm £10.25 £8.54 952851

Very Fine (approx 320g) 150mm £10.74 £8.95 952852

Inc.vat Ex.vat Code

Polishing Kit for

Alloys, Brass &

Copper

Used with a power drill or ﬂ exible

shaft, this kit provides all you

need to produce a mirror ﬁ nish

on aluminium, brass, copper and similar soft metals. It only

takes two easy steps, initially with the 100mm ﬁ rm mop and

brown compound, followed by the 100mm soft mop and blue

compound. The kit also includes a straight arbor with which to

mount the mops in a drill chuck.

Kit for Alloys, Brass and Copper £16.44 £13.70 503930

Inc.vat Ex.vat Code

Polishing Kit for

Used with a power drill or ﬂ exible

need to produce a mirror ﬁ nish

Polishing Kit for Steel

& Stainless Steel

Kit for Steel & Stainless Steel £24.95 £20.79 503931

Inc.vat Ex.vat Code

Kit for Chrome & Plated Metal £14.94 £12.45 503934

Inc.vat Ex.vat Code

Polishing Kit

for Chrome &

Plated Metal

on plastics, acrylics, ﬁ breglass and

Bakelite. The kit contains everything

needed to carry out the process in two

Polishing Kit for

Plastic & Fibreglass

Kit for Plastic & Fibreglass £16.44 £13.70 503933

Inc.vat Ex.vat Code

Used with a power drill or ﬂ exible

shaft, this kit provides all you need to

produce a high gloss ﬁ nish on wood.

The kit contains everything needed

to carry out the process in three easy

stages. Firstly, an aluminium oxide

lapping mop, followed by the 100mm

ﬁ rm mop and buff compound. Finally,

for a high gloss ﬁ nish the 100mm soft

mop and buff compound. The kit also

includes a straight arbor with which to

mount the mops in a drill chuck.

Polishing Kit for Wood

Kit for Wood £19.44 £16.20 503932

Inc.vat Ex.vat Code

Used with a power drill or ﬂ exible shaft, this kit provides all you

need to produce a mirror ﬁ nish on aluminium, brass, copper and

similar soft metals. It only takes two easy steps, initially with the

100mm, two section stiched mop and brown compound, then

followed by the 100mm x 25mm loose leaf, soft mop and blue

compound. The kit also includes a pigtail arbor with a 6mm shank

with which to mount the mops in a drill chuck.

H/D Kit for Alloys, Brass and Copper £24.44 £20.37 503937

Inc.vat Ex.vat Code

Heavy Duty

Polishing Kit for

Brass, Copper &

Non-Ferrous Metals

H/D Kit for Steel, Stainless Steel,

Ferrous Metals £24.44 £20.37 503938

Inc.vat Ex.vat Code

Heavy Duty Polishing

Kit for Steel, Stainless

Steel & Ferrous

Metals

Used with a power drill or ﬂ exible shaft, this kit provides all you

need to produce a mirror ﬁ nish on chrome, plated metals and

EPNS (electro plated nickel silver). It only takes two easy steps,

initially with the 100mm, 2 section stitched mop and white

compound, followed by the 100mm x 25mm looseleaf soft mop

and white compound. The kit also includes a pigtail arbor with a

6mm shank with which to mount the mops in a drill chuck.

Heavy Duty

Polishing Kit for

Chrome, Plated

Metals & EPNS

H/D Kit for Chrome, Plated Metals & EPNS £24.44 £20.37 503941

Inc.vat Ex.vat Code

Used with a power drill or ﬂ exible shaft, this kit provides all you

need to produce a high gloss ﬁ nish on plastic, acrylics, ﬁ breglass

and Bakelite. It only takes two easy steps, initially with the 100mm,

2 section stitched mop and brown compond, followed by the

100mm x 25mm soft loose leaf mop and buff compound. The

kit also includes a pigtail arbor with a 6mm shank with which to

mount the mops in a drill chuck.

H/D Kit for Plastic, Fibreglass & Bakelite £24.44 £20.37 503940

Inc.vat Ex.vat Code

Heavy Duty

Polishing Kit for

Plastic, Fibreglass

& Bakelite

Used with a power drill or ﬂ exible shaft, this kit provides all you

need to produce a high gloss ﬁ nish on wood, hard and soft. It only

takes two easy steps, initially with the 100mm x 4 section aluminium

oxide abrasive lap, followed by the 100mm x 2 section stitched mop

and buff compound. The kit also includes a pigtail arbor with a 6mm

shank with which to mount the mops in a drill chuck.

H/D Kit for Wood £24.44 £20.37 503939

Inc.vat Ex.vat Code

Heavy Duty

Polishing Kit

for Wood

Polishing

Mops

Looseleaf

Grade B - 75 x 25mm £6.44 £5.37 503901

Grade B - 100 x 25mm £7.44 £6.20 503902

Grade B - 150 x 25mm £10.74 £8.95 503903

Grade B - 200 x 25mm £19.44 £16.20 503904

Grade G - 100 x 25mm £7.34 £6.12 503905

Grade G - 150 x 25mm £8.75 £7.29 503906

Grade G - 200 x 25mm £13.94 £11.62 503907

Inc.vat Ex.vat Code

Polishing Mops Stitched

Grade G - 100mm x 1 Section £6.44 £5.37 503908

Grade G - 150mm x 1 Section £8.94 £7.45 503909

Grade G - 150mm x 2 Section £9.95 £8.29 503910

Grade G - 200mm x 2 Section £15.95 £13.29 503911

Grade G - 200mm x 3 Section £17.94 £14.95 503912

Grade B - 100mm x 1 Section £7.94 £6.62 503913

Grade B - 100mm x 2 Section £9.95 £8.29 503914

Grade B - 150mm x 1 Section £9.44 £7.87 503915

Grade B - 150mm x 2 Section £15.95 £13.29 503916

Grade B - 200mm x 2 Section £18.95 £15.79 503917

Inc.vat Ex.vat Code

• For use on taper spindles

• Unstitched for a softer working surface

• All looseleaf mops are 25mm thick

• First stage polishing on copper, brass, pewter, gold, silver and

most hard plastics - B mop

• Final ﬁ nishing on harder metals such as steel, stainless steel and

iron – B mop

• Final ﬁ nishing on non-ferrous metals, such as brass and copper

- G mop

• Fine ﬁ nishing of plastics - G mop

• For use on taper spindles

• Stitched to give a ﬁ rmer working surface

• Sections are approximately 13mm wide

• First stage polishing on copper, brass - B mop

• Second stage polishing steel, stainless steel and iron – B mop

• Final ﬁ nishing on ferrous metals - G mop

• General polishing where surface is unscratched - G mop

18_Sharpening 509_527.indd 524 29/11/2013 13:49