Specifications

523
18
Order online axminster.co.uk/sharpening
Grindstones & Wire
Brushes
Polishing Machines
High quality wheels with 0.35mm diameter
wire suitable for either 150mm(6”) or 200mm(8”)
grinders. Please note these brushes have a standard 38mm bore
and are provided with a set of bushes to reduce this to either 1”,
3/4”, 5/8” or 1/2”. Reducing bushes are not available to allow these
brushes to be fi tted to Creusen grinders (i.e.15mm bore).
A pair of semi-friable grindstones suited to the
grinding of fi ne edged hand tools where the risk of
overheating needs to be avoided. Available in 150mm diameter
31.75mm(1.1/4”) bore, 80 grit and two widths, 20mm or 25mm.
A pair of semi-friable grindstones suited to the
grinding of fi ne edged hand tools where the risk of
150mm dia 20mm width 80G £17.94 £14.95 075001
150mm dia 25mm width 80G £19.94 £16.62 075003
Inc.vat Ex.vat Code
Red Grinding Wheels
Recommended for general tool sharpening, these wheels have a
soft ceramic bond that enables the tool to be cut freely avoiding
excessive overheating when grinding. All 31.75mm bore (bore
reduction bushes available).
150mm dia 20mm width 60G £15.24 £12.70 500379
150mm dia 20mm width 80G £15.24 £12.70 500380
150mm dia 20mm width 100G £15.24 £12.70 500378
Inc.vat Ex.vat Code
Aluminium Oxide ‘White’
Grinding Wheels
Replacement Silicon Carbide “Green Grit” (120 grit) Grinding
wheels, suitable for TCT grinding. 200 or 150mm diameter, 20mm
width and 31.75mm(1.1/4”) bore (reducing bushes available).
150mm dia 20mm width 120G £17.94 £14.95 500376
200mm dia 20mm width 120G £27.95 £23.29 500384
Inc.vat Ex.vat Code
Silicon Carbide
‘Green’ Grinding
Wheels
Replacement Carborundum Grindstones
for general grinding. 31.75mm(1.1/4”) bore
(bore reduction bushes available).
150mm dia 20mm width (31.75mm) 36G £10.25 £8.54 500372
150mm dia 20mm width (31.75mm) 60G £10.25 £8.54 500374
Inc.vat Ex.vat Code
Carborundum
Grinding Wheels
High quality wheels with 0.35mm diameter
wire suitable for either 150mm(6”) or 200mm(8”)
Wire Brushes for
Bench Grinders
150mm Steel Double Row £13.44 £11.20 100486
200mm Steel Single Row £15.95 £13.29 100490
Inc.vat Ex.vat Code
All the bushes have an external diameter of 31.75mm (1.1/4”) and
are priced per pair.
1.1/4” - 13mm £3.24 £2.70 500400
1.1/4” - 15mm £3.24 £2.70 500401
1.1/4” - 20mm £3.24 £2.70 500403
1.1/4” - 1/2” £3.24 £2.70 500404
1.1/4” - 3/4” £3.24 £2.70 500405
1.1/4” - 5/8” £3.24 £2.70 500406
Inc.vat Ex.vat Code
Grinding Wheel Reduction Bushes
Polishing Machines
First class polishing machines, for either 150mm
or 200mm diameter mops driven by motors with
plenty of power for heavier polishing work. The
units come with the polishing guard covers and
tapered spindles, ready to accept whichever polishing mop is
required. N.B. Polishers not supplied with polishing mops, please
order separately.
DPC7150T 150mm Polisher £229.94 £191.62 510062
DPC7200T 200mm Polisher £274.94 £229.12 510064
Inc.vat Ex.vat Code
Creusen DPC7150T & DPC7200T
Powerline Polisher - 230V
For the more industrial or commercial user, this
polisher offers more power than the 7000 series,
but in principle is otherwise very similar. The frame
is a little longer and provides marginally better
access around the mops. Supplied with fully guarded tapered
polishing spindles on which to mount the polishing mops, it is
ready to accept most standard polishing mops. If needed, the
polishing spindles can be removed so that the polisher can
accept parallel polishing heads as offered by such companies as
3M. Fitted with thermal overload protection.
N.B. Polishers not supplied with polishing mops, please order
separately.
Creusen DPC8150T &
DPC8200T Professional
Polisher - 230V
DPC8150T 150mm Polisher £279.95 £233.29 400184
DPC8200T 200mm Polisher £349.94 £291.62 400187
Inc.vat Ex.vat Code
A double ended polisher offered in either single
phase 230V(900W) or three phase 415V(1,100W)
options and supplied with tapered polishing
spindles on the shaft ends as standard. They
feature a 50mm dust port on polishing covers and No-Volt
release switches. These machines have full industrial build quality
intended for heavy duty use.
DPC9200 200mm Polisher 240V £719.94 £599.95 400189
DPC9200 200mm Polisher 415V £719.94 £599.95 400190
Inc.vat Ex.vat Code
Creusen DPC9200
Industrial Polisher - 230V
Replacement Carborundum Grindstones
for general grinding. 31.75mm(1.1/4”) bore
Model DPC7150T
Rating Trade
Power 350W
Voltage 230V
Speed 2,800rpm
Wheel Diameter 150mm
Weight 6kg
DPC7200T
Trade
600W
230V
2,800rpm
200mm
8kg
Model DPC8150T
Rating Trade
Power 500W
Voltage 230V
Speed 2,800rpm
Wheel Diameter 150mm
Weight 7kg
DPC8200T
Trade
800W
230V
2,800rpm
200mm
9kg
Model DPC9200
Rating Industrial
Power 900W (240V) - 1,100W (415V)
Speed 3,400rpm
Wheel Diameter 200mm
Weight 16kg
18_Sharpening 509_527.indd 523 29/11/2013 13:48