Specifications

522
18
Section
axminster.co.uk/signup for our exclusive email offersCall 03332 406406
Accessories
Creusen Professional Grinders
Model DS8150T
Rating Industrial
Power 500W (230V) - 600W (415V)
Wheel Diameter 150mm
Wheel Width 20mm
Bore 15mm
Weight 10kg
Comparison Chart - Creusen Professional Grinders
The DS8150T, in 230V or 415V, with 150mm
diameter wheels and a 500W(230V)-600W(415V)
motor, has 36 grit and 80 grit x 20mm wide
standard grindstones. Fitted with fully adjustable,
double locking tool rests (adjustable in depth, height and
distance away from the wheel) and no-volt-release safety
switches. (bore size 15mm). Not suitable for use with wire brushes.
DS8150T Grinder 230V £264.95 £220.79 400192
DS8150T Grinder 415V £264.95 £220.79 400194
Inc.vat Ex.vat Code
Creusen
DS8150T Professional Grinder
DS8150TS
Industrial
500W
150mm
40mm & 20mm
15mm
10.7kg
The DS8150TS has 150mm diameter wheels one 80
grit x 20mm wide standard stone and one 40mm
wide white stone. It is fi tted with fully adjustable,
double locking tool rests (adjustable in depth,
height and distance away from the wheel) and no-volt-release
safety switches. (Bore Size 15mm). Not suitable for use with wire
brushes.
DS8150TS Grinder 230V £274.94 £229.12 400196
Inc.vat Ex.vat Code
Creusen DS8150TS Professional
Grinder (Wide Wheel)
Comparison Chart - Creusen Professional Grinders
DS8200AK c/w
Extraction Stand
240V (100279)
Available in a choice of 230V single phase or 415V
three phase with industrial power rating. The
DS8200T, with 200mm wheels and 800W(230V)-
850W(415V) motor, has 36 grit and 80 grit x 25mm
standard grindstones. The DS8200T is fi tted with
fully adjustable, double locking tool rests (adjustable in depth,
height and distance away from the wheel) and no-volt-release
safety switches. (bore size 15mm). Also available is the DS8200AK
(order no: 100279) that comes complete with an integrated dust
extraction stand. Not suitable for use with wire brushes.
Creusen
DS8200T Professional Grinder
DS8200T
Industrial
800W (230V) - 850W (415V)
200mm
25mm
15mm
16.5kg
DS8200T Grinder 230V £329.94 £274.95 400200
DS8200T Grinder 415V £319.94 £266.62 400201
DS8200AK c/w Extraction Stand 230V £889.94 £741.62 100279
Inc.vat Ex.vat Code
Support wall console for wall mounting Creusen 7000 and 8000
double-ended grinders.
Wall Support Stand £59.94 £49.95 900317
Inc.vat Ex.vat Code
Creusen Wall
Support Stand
Accessories
Support wall console for wall mounting Creusen 7000 and 8000
An extension spindle to which a polishing wheel or wire brush
can be fi tted whilst still retaining both the standard grindstones
on the grinder. Supplied with nut and fl anges. Suitable for
Creusen machines only.
RH Extension Spindle £38.45 £32.04 900174
Wheel Guard Cover £27.95 £23.29 200156
Inc.vat Ex.vat Code
Creusen
Extension
Spindle R/H
An extension spindle to which a polishing wheel or wire brush
By fi tting this extension to the RH side it is possible to use a
fl exible drive shaft or small polishing mop etc. while still retaining
both stones on the grinder. Suitable for 150mm models only.
Chuck capacity 9.5mm(3/8”).
Drill Chuck & Extension £52.94 £44.12 900185
Wheel Guard Cover £27.95 £23.29 200156
Flexible Shaft 1.3m £52.94 £44.12 910258
Inc.vat Ex.vat Code
Creusen Drill
Chuck &
Extension
£27.95
£23.29 200156
By fi tting this extension to the RH side it is possible to use a
Consists of safety guards and tapered adaptors for use with
polishing mops.
L/H Tapered Polishing Mop Adaptor £48.95 £40.79 900152
R/H Tapered Polishing Mop Adaptor £48.95 £40.79 900163
150mm Polisher Guard £44.45 £37.04 400323
200mm Polisher Guard £50.94 £42.45 400324
Inc.vat Ex.vat Code
Creusen Tapered
Spindles &
Polishing Covers
Consists of safety guards and tapered adaptors for use with
Dressers
Affectionately known here at Axminster as the Devil Stone, this block
of coarse carborundum is used for dressing worn or unbalanced
wheels especially where they have become dished or rounded by
continuous use. Just hold it against the stone for a short time and it
is returned to pristine condition. Size 150mm x 25mm x 25mm.
Dressing Stick £3.95 £3.29 410074
Inc.vat Ex.vat Code
Wheel Dressing
Stick
A very useful device for dressing across the width of grinding
wheels to produce a fl atter surface than with the single point
dressers. The diamond dressing surface measures 40mm by
15mm and the overall length is 150mm.
Dressing Block £9.44 £7.87 410057
Inc.vat Ex.vat Code
Diamond
Dressing Block
A very useful device for dressing across the width of grinding
An industrial diamond embedded in a round steel bar for the
rapid dressing, reshaping or deglazing of all types of grindstone.
6” x 3/8” 50 Carat £4.74 £3.95 410058
6” x 1/2” 50 Carat £5.15 £4.29 410059
8” x 1/2” 75 Carat £5.15 £4.29 410060
Inc.vat Ex.vat Code
Diamond Wheel
Dressers
Affectionately known here at Axminster as the Devil Stone, this block
18_Sharpening 509_527.indd 522 29/11/2013 13:47