Specifications

ManualsBrandsAxminster ManualsGrinderAW8SRG2

517

Order online axminster.co.uk/sharpening

147 Page Handbook HB-10 £24.44 £20.37 910075

Inc.vat Ex.vat Code

Discs for LA-120 £27.95 £23.29 475425

Inc.vat Ex.vat Code

Honing Wheel £41.94 £34.95 306015

Inc.vat Ex.vat Code

Tormek Accessories and Upgrades

A well designed jig used for

re-grinding both guillotine

blades and power planer

knives of any length and

minimum width of 13mm.

Grinds each blade identically so they are never out of balance.

This jig allows you to measure exactly how much is to be

removed. Tormek T-7 is recommended for this jig.

SVH-320 Jig £134.94 £112.45 910085

Inc.vat Ex.vat Code

Tormek SVH-320

Planer Knife Jig

There is a distinction between shaping and sharpening. Once

the tool is shaped, you just want to touch up the edge, never

removing more steel than necessary. The time consuming

initial shaping is now possible using a bench grinder in

conjunction with the Tormek BGM-100 Mounting Set. With the BGM-100

you can use your Tormek jigs and setting devices on a bench grinder,

giving you perfect control and making the transfer to your Tormek for

ﬁ nal ﬁ nishing simple. Contains horizontal base, universal tool support and

instructions.

Tormek BGM-100 Tool Rest , Jigs and

Setting Gauge – Package Deal!

Tormek BGM-100 Tool Rest £64.94 £54.12 210952

Tormek SVD-185 Gouge Jig £66.95 £55.79 910084

Tormek SVS-50 Multi-Jig £49.94 £41.62 910091

Tormek TTS-100 Tool Setter £19.94 £16.62 202517

Inc.vat Ex.vat Code

instructions.

With the BGM-100 you can

use many of the Tormek jigs

on your bench grinder.

Honing Paste PA-70 £7.25 £6.04 910077

147 Page Handbook HB-10 £24.44 £20.37 910075

Pro-Anglemaster WM-200 £16.74 £13.95 368028

200mm Wheel SG-200 £79.94 £66.62 910078

250mm Wheel SG-250 £129.95 £108.29 910079

Universal Tool Support US-105 £39.95 £33.29 910093

Horizontal Base XB-100 £17.24 £14.37 910095

Tormek Instructional DVD £11.15 £9.29 475907

Inc.vat Ex.vat Code

This unique turning tool setter

enables exact replication of the

edge on bowl and spindle gouges

as well as on ﬂ at and oval skews with a straight or a curved edge. The

setter works with the Gouge Jig SVD-185 and the Multi-Jig SVS-50. The

strength of the setter is that it works irrespective of the stone diameter

and always produces the same edge angle. Built-in settings give

pre-determined edge geometries as recommended by experienced

turners. A real time saver!

Tormek TTS-100

Turning Tool

Setter

TTS-100 Tool Setter £19.94 £16.62 202517

Inc.vat Ex.vat Code

Contains an 80 minute instructional DVD and a

detailed handbook. Shows how to shape, sharpen

and hone all your turning tools.

TNT-300 Instruction Box £33.95 £28.29 701804

Inc.vat Ex.vat Code

Tormek TNT-300

Woodturner’s

Instruction Box

Spares and accessories for Tormek Grinding & Sharpening System .

Tormek Spares

The Turning Tools Setter TTS-100 is

delivered with recipe labels so

that you can easily mark your skews,

bowl and spindle gouges with the

setting used.

The Turning Tools Setter TTS-100 is

Made of solid tanned leather for

the honing and polishing of the

inside of turning gouges,

woodcarving gouges and V-parting tools. One disc has a radius of

3mm (1/8”), the other a 60° tip.

Tormek LA-120

Proﬁ led Leather

Honing Wheel

This set of optional extra discs has a radius of

2mm (3/32”) and a 45° tip. These smaller disc

proﬁ les permit the honing of small carving tools

with very narrow proﬁ les.

Tormek LA-124 Optional

Narrow Discs for LA-120

The kit includes an EzyLock Shaft, EzyLock Nut, two replacement

nylon bearings, cross pin, stone washer and drive wheel washer.

The MSK-250 ﬁ ts the T-7, Tormek 2000 and any 250mm motorised

Tormek of any age. The MSK-200 ﬁ ts the T-3 and any other

200mm Tormek machine.

EzyLock Main Shaft Kit for T7 £52.94 £44.12 211102

EzyLock Main Shaft Kit for T3 £47.94 £39.95 211103

Inc.vat Ex.vat Code

Tormek EzyLock Main Shaft Kit

The Tormek SB-250 is designed for hard

materials and fast sharpening. It delivers fast

steel removal on HSS and exotic alloys and can ‘touch up’

tungsten carbide. The key to removing material efﬁ ciently at low

rpm is very sharp grains with high hardness and relatively ﬁ ne

grit size. The SB-250 can be graded with the stone grader for fast

material removal or ﬁ ne surface ﬁ nish.

SB-250 Silicon Stone £144.95 £120.79 702803

Inc.vat Ex.vat Code

Tormek SB-250

Blackstone

Silicon Stone

A Japanese waterstone ﬁ tted to your

Tormek delivers an extra ﬁ ne ﬁ nish. It excels

at sharpening hand tools where a minimum of

steel removal is needed and a superior surface ﬁ nish is

demanded. The stone is 4,000 grit and is ideal for carving tools,

scissors, knives and well maintained plane irons and bench tools.

SJ-200 Waterstone - 200mm £169.94 £141.62 210936

SJ-250 Waterstone - 250mm £249.95 £208.29 702802

Inc.vat Ex.vat Code

Tormek SJ-200 and

SJ-250 Japanese

Waterstone

Protective Cover keeps dust off your Tormek

Grinder and prevents it singing at night.

Protective Cover £15.44 £12.87 910076

Inc.vat Ex.vat Code

Tormek MH-380

Protective Cover

The appreciated Tormek Handbook

explains the basics of edge tool

sharpening, gives you useful tips and

an easy, step by step approach to

the Tormek method of sharpening.

(Included with each Tormek machine).

Tormek HB-10

Handbook

BGK-400 Tormek Bench Grinder Kit £154.94 £129.12 504087

Inc.vat Ex.vat Code

RB-180 Rotating Base £43.94 £36.62 952887

Inc.vat Ex.vat Code

Enables you to easily rotate the

machine 180° and lock it with

complete stability. It makes it

easy to alternate between

sharpening and honing or sharpening towards

or away from the edge. Fits all Tormek models.

Tormek RB-180

Rotating Base

18_Sharpening 509_527.indd 517 29/11/2013 13:40