Specifications

516
18
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406
Tormek Jigs
SVM-45 Short Knife Jig £29.94 £24.95 910089
SVM-140 Long Knife Jig £38.94 £32.45 702085
Both Jigs £64.96 £54.13 910088
Inc.vat Ex.vat Code
With this original Tormek knife
jig you can sharpen most types
of knives. The jaws of the clamp
adjust to suit different
thicknesses of blade. Restore the blade to its original edge angle
or choose the angle you prefer. The jig rests freely onto the
Universal Support so you can follow the curve of the blade and
get an even bevel. The edge angle can be fi ne tuned by turning
the handle. Use SVM-45 for ordinary and smaller knives down to a
minimum of 70mm blade length.
Tormek SVM-45
Knife Jig
This knife jig is developed
especially for long and fl exible
knives, e.g. fi lleting knives. Its
broad clamping area, 140mm
(5.1/2”), stabilises a thin blade
but is also suitable to use for
knives with longer blades, from
160mm (6.1/4”).
Tormek SVM-140 Knife Jig
Heavy rubber lined wedge stop for best grip.
The rotation of the stone presses the axe
fi rmly into the jig.
Sharpen straight or curved axes
and hatches. Allows both bevels
of an axe head to be ground at
exactly the same angle over the
full length of the edge (maximum head size 165mm).
SVA-170 Jig £12.24 £10.20 910081
Inc.vat Ex.vat Code
Tormek SVA-170
Axe Grinding Jig
Sharpens profi led spindle
moulder knives. The knife is
held securely in position with
a magnet and guide pins
which match the safety pin
holes in the knife. The jig can be used to sharpen all makes and
shapes of moulding knives with 24/30/38mm between centres up
to a maximum width of 100mm. Tormek T-7 Sharpening System is
recommended for this jig.
SVP-80 Jig £119.94 £99.95 701403
Inc.vat Ex.vat Code
Tormek SVP-80
Profi le Knife Jig
Thanks to the unique Tormek
design you can also easily
sharpen oval section skews.
This is a very comprehensive
jig which can be used equally
well for turning and carving
tools. There are two holders
provided, one for turners’ skew
chisels, either oval or square section, from 13mm to 35mm wide,
and the other for carvers’ skew chisels, parting tools, roughing
gouges and wide carving gouges up to 50mm wide. Great for
replication of the shape on turning skew chisels with a straight
or curved edge.
Tormek SVS-50
Multi-Jig
SVS-50 Jig £49.94 £41.62 910091
Inc.vat Ex.vat Code
If you want a rounded back you
can easily grind off the heel of
the bevel - just unscrew the back
knob and allow the tool holder
to move forwards.
A real favourite. For sharpening
bowl, spindle and fi ngernail turning
gouges and most carving gouges
up to 25mm(1”) wide. Can be set for
various lengths of the side bevel. Also
for turning cutters and hollowing tools.
Due to the precision, sharpening is fast,
and you can get exactly the same even,
symmetrical shape over and over again.
Use the recommended settings or create your custom shapes.
Comes with a set of labels so that you can record the jig settings
for each gouge for future reference.
SVD-185 Jig £66.95 £55.79 910084
Inc.vat Ex.vat Code
Tormek SVD-185
Turning Tool Jig
bowl, spindle and fi ngernail turning
up to 25mm(1”) wide. Can be set for
various lengths of the side bevel. Also
for turning cutters and hollowing tools.
Use the recommended settings or create your custom shapes.
A universal tool rest that is easy
to adjust and thanks to the
patented design, stays just
where you set it. The wide plate
is just the job for the sharpening
of turning scrapers, carving scorps, inshaves, screwdrivers and
re-truing of cabinet scrapers.
Torlock Toolrest £26.94 £22.45 910083
Inc.vat Ex.vat Code
Tormek SVD-110
Toolrest
Fast and secure locking due to the Tormek
patented design, which increases the locking
force by 250%!
The fl anges ensure a 90°
positioning of the tools
towards the grind stone.
From Tormek comes a jig for
sharpening short carving tools
and chisels down to 45mm
long, including power carving
tools (Bosch, Proxxon, AMT etc).
Used in conjunction with the Universal Support, the jig is
automatically held square to the grindstone.
SVS-32 Jig £20.94 £17.45 910090
Inc.vat Ex.vat Code
Tormek SVS-32
Short Tool Jig
The support plate has a
sliding surface so the holder
with the scissors can easily
be moved while it is pressed
onto the plate.
A jig from Tormek for all sizes of
scissors, you can even sharpen
garden shears. Two clamps hold
the blade securely.
SVX-150 Jig £39.95 £33.29 910092
Inc.vat Ex.vat Code
Tormek SVX-150
Scissor Jig
You create a four facet point. The
thrust force required is considerably
reduced compared to a conventional
cone point drill bit.
The Drill Bit Sharpening
Attachment DBS-22 makes it
possible to sharpen drill bits on
your Tormek water cooled sharpening
system with the highest precision. The
optimal point and clearance angle can
be set according to each drilling
requirement in regards to drill size and material.
You can restore completely worn drills as well as
broken drills to a perfect shape. The drill holder
as well as the guides are made with the highest precision to
ensure that the lengths of the two cutting edges will be equal
within close tolerances. Copes with drills from 3mm (1/8”) to
22mm (7/8”). Fits all Tormek models.
Tormek DBS-22
Drill Bit Sharpener
DBS-22 Drill Bit Sharpener £184.94 £154.12 950970
Inc.vat Ex.vat Code
Now with a slightly thinner grip which
enables you to sharpen smaller knives
without the jig touching the stone.
The new holder works with the
Tormek Knife Jig SVM-45. Your
knife’s handle, rather than the
blade, mounts in the SVM-00
holder. The SVM-00 then clamps
into the SVM-45. Using this system
there is really no limit to how
small a blade you can sharpen.
Small knife blades are diffi cult
to sharpen at the best of times.
Normally sharpened free hand, consistent shape and edge angle
are always a challenge. The SVM-00 opens up the ability to work
with complete control on a wide range of small knives. You can
now sharpen knives of different shapes for whittling, chip carving
and detail work. The SVM-00 can also handle narrow chef’s knives
like boning or fi sh fi lleting knives. You can even sharpen small
blades of folding knives with perfect control.
SVM-00 Small Knife Holder £25.94 £21.62 504136
Inc.vat Ex.vat Code
Tormek SVM-00 Small
Knife Holder
18_Sharpening 509_527.indd 516 29/11/2013 13:39