Instruction manual

Quantity Item Model Number

1 No. Mortising Machine Base with Mounting Columns, Plunge Depth Stops,

Balance Spring, Head Box, Chisel Adaptor, Chuck and

Fence Mounting Block assembled MS3612

1 No. 12mm Auger Chisel and Bit Set

1 No. Composite Board Machine Table

1 No. Back Fence with Main Mounting and Hold Down Mounting Rods Fitted

1 No. Large Tensioning Spring

1 No. Lift and Shift Locking Handle

1 No. Fence Adjusting Assembly

1 No Hold Down Yoke

1 No. Accessories Rack with 2 Large Panhead Screws

1 No. Small ‘P’ Clip

1 No. Rod Lever Handle

1 No. Small Tensioning Spring

1 No. Large Head Machine Screw

1 No. Grip Sleeve

1 No. 1-13mm B6 Drill Chuck

1 No. B6 to Parallel Chuck Mounting Shaft (For Drilling Operations)

Tool Packet

1 No. 4mm Allen Key

1 No. 5mm Allen Key

1 No. 6mm Allen Key

1 No. Spring Nose Chuck Key

1 No. Plastic Tube (Dust Extractor Connector) and Short Bolt

2 No. Countersunk Screws (Secure Down Machine Table)

1 No. Small Light Fitting on Flexi-Conduit with Fixing Bracket Attached

1 No. Lift and Shift Handle

1 No. Instruction Manual

What’s in the Box