Specifications

02
Index of Contents
Page No.
Index of Contents 02
Declaration of Conformity 02
What’s Included 03
General Instructions for 230V Machines 03-04
Specific Precautions Using Planer Thicknessers 04-05
Specifications 05
Initial Assembly and Setting Up 06-07
Machine Illustration and Parts Description 08-09-10-11
Operating Illustrations 12-13
Changing the Planer Blades 14-15-16
Routine Maintenance 17-18-19
Parts List/Drawing 1 (AW106PT2) 20-21
Parts List/Drawing 2 (AW106PT2) 22-23
Parts List/Drawing 3 (AW106PT2) 24-25
Parts List/Drawing 4 (AW106PT2) 26
Parts List/Drawing 1 (AW128PT-AW168PT) 27-28
Parts List/Drawing 2 (AW128PT-AW168PT) 29-30
Parts List/Drawing 3 (AW128PT-AW168PT) 31-32
Parts List/Drawing 4 (AW128PT-AW168PT) 33
Notes 34-35
Copied from CE Certificate
Warning
The symbols below advise that you follow the correct
safety procedures when using this machine.
Dust mask
should be worn
Ear protection
should be worn
Eye protection
should be worn
Fully read manual
and safety instructions
before use
HAZARD
Motor gets hot
The undersigned, F.Recherburg
authorised Laizhou Planet Machinery
Co., Ltd. No. 989. North Laizhou Road
261400 Laizhou Shandong
P.R.China declares that this product:
manufactured by Laizhou Planet
Machinery Co. is in compliance with
the following standards or
standardisation documents EC
Directive 98/37/EC Artlcle 8, section
2b Machinery in accordance with the
Council Directive 98/37/EC.
ML392
The undersigned,
authorised Laizhou Planet Machinery
Co., Ltd. No. 989. North Laizhou Road
261400 Laizhou Shandong
P.R.China declares that this product:
manufactured by Laizhou Planet
Machinery Co. is in compliance with
the following standards or
standardisation documents EC
Directive 98/37/EC Artlcle 8(2)b, or
Article 8(2)c, Machinery in
accordance with the Council
Directive 98/37/EC.
ML393
The undersigned, G. Reimann
authorised Laizhou Planet Machinery
Co., Ltd. Yutai West Street, Laizhou,
Shandong 261400 P.R.China declares
that this product:
manufactured by Laizhou Planet
Machinery Co. is in compliance with
the following standards or
standardisation documents
2006/95/EC
ML394Q/C2-410Q