Specifications

Index of Contents
2
Index of Contents 02
Declaration of Conformity 02
What’s Included 03
Optional Accessories 03
General Instructions for 230V Machines 04
Specific Safety Instructions for Woodturning Lathes 05
Specifications 06
Assembly Instructions 6-10
Lathe Assembly 6-7
Lathe Stand Assembly 7-8
Lathe Extension Assembly 1 and 2 8-9
Illustration and Description 10-11
Operating Instructions 12-14
Rotating the Headstock 12
Removing the Faceplate 12
Indexing Facility 13
Removing the Drive Centre 13
Changing the Belt Speed 13-14
Maintenance 14
Parts Breakdown/List 15-16-17-18-19-20-21
Wiring Diagram 22
Notes 23
Declaration of Conformity
Copied from CE Certificate
The undersigned, authorised by Calvin Chon
Manufactured by Kingcraft Machinery Company
Limited/NO.26, Gong Yeh 12 Rd., Da-Li City, Taichung
County, Taiwan., manufacturer, declares that the
machine described hereafter:
WOOD TURNING LATHE
manufactured byKingcraft Machinery Company
Limited., is in compliance with the standards
determined in the following Council Directive.
• EN ISO 12100-1: 2003 + A1: 2009
• EN ISO 12100-2: 2003 + A1: 2009
• EN ISO 1412-1: 2007
• EN 60204-1: 2006 + A1: 2009
• EN 61000-6-2: 2005
• EN 61000-6-4: 2007
Warning
The symbols below advise that you follow
the correct safety procedures when using
this machine.
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
Two Man
Assembly
Dust mask
should be worn
Please read the Instruction Manual prior to using
your new machine; as well as the operating
procedures for your new machine, there are
numerous hints and tips to help you to use the
machine safely and to maintain its efficiency and
prolong its life. Keep this Instruction Manual readily
accessible for any others who may also be required to
use the machine.
Model Number: 1417-1430-1443-1643-1417INV-1430INV-
1443INV-1643INV-1628INV-4224B-1642VS