User Manual

9
For optimum performance from your
WISP-20M, the camera must be balanced
on both axes. To balance the camera,
follow these steps:
ADJUSTING THE ROLL ANGLE
(SIDE TO SIDE)
1. Stand the WISP-20M/camera
assembly on a level surface. If the
camera tips to one side, the camera
needs to be moved in the opposite
direction.
2. Insert a screwdriver through the slot
in the mounting plate, and use it to
slightly loosen the mounting screw.
Move the camera toward the side
that needs more weight.
3. Tighten the mounting screw.
4. Repeat these steps until the camera
is balanced from side to side when
resting on the mounting platform.
BALANCING THE CAMERA