User Manual

13
LOCK MODE
Lock mode keeps the camera balanced
in the position in which it’s pointed,
regardless of the angle or movement of
the handle. Switching to Lock mode from
Follow mode allows the user to point the
camera in a single direction while still
moving.
To enter Lock mode, quickly press and
release the control stick once.
Pressing the control stick again returns
the WISP-20M to Follow mode.
LOW-ANGLE SETTING
To use your camera in an inverted
position, follow these steps:
1. While the WISP is on, press the reset
button twice, and wait for the WISP
to beep.
2. After the beep, hold the camera in
place, and swivel the handle around
the camera until it is pointing up.
3. Let the gimbals stabilize the camera,
and then reframe your picture by
using the control stick.
Note: To stop using the inverted mode,
repeat the previous steps and rotate the
handle to underneath the camera.