User Manual

12
For optimum performance, start the
WISP-20M only when the camera has
been balanced.
Stand the WISP-20M/camera assembly
on a level surface, and press the power
button. The WISP will begin to calibrate
for balance by adjusting the roll and
pitch of the camera platform. Wait until
the WISP has fully calibrated the balance
and comes to a stop before you start to
use it.
FOLLOW MODE
The WISP-20M starts up in Follow mode.
In Follow mode, the camera will smoothly
trail the movement of the handle in
whichever direction it is panned or tilted.
USING THE WISP-20M
1.
2.