User Manual

CONNECTING THE BODY BRACE
1. Screw the telescoping extension into the
extension socket on the body of the clamp.
(Fig. 5)
2. Firmly press the body brace onto the end of the
extension until it snaps in place. (Fig. 6)
3. Rotate the twist-lock to loosen and pull out the
extension, then lock to secure. (Fig. 7)
ACCESSORY ATTACHMENT
The GSU-1 offers two 1/4-20 threaded
sockets in the front and a 25 mm diameter
crossbar. Use these to attach Axler articulating
arms or 25 mm clamps and connect accessories
like a video monitor onto your rig. (Fig. 8)
Fig. 5
Fig. 6
Fig. 7
Fig.8